Online slicer for Z-Bolt printers
Upload an STL or 3MF, pick your Z-Bolt printer among 9 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.Z-Bolt in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 9 |
| Nozzle sizes | 0.4, 0.6 and 0.8 mm |
| Largest printable area | 1000 x 1000 x 1000 mm (Z-Bolt S1000) |
| Smallest printable area | 300 x 300 x 350 mm (Z-Bolt S300 Dual) |
| Layer heights in the print presets | 0.08 to 0.48 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled Z-Bolt presets |
Every Z-Bolt printer in the slicer (9)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| Z-Bolt S300 | 0.4, 0.6 and 0.8 mm | 300 x 300 x 350 mm | 0.08 to 0.48 mm | .gcode |
| Z-Bolt S300 Dual | 0.4, 0.6 and 0.8 mm | 300 x 300 x 350 mm | 0.08 to 0.48 mm | .gcode |
| Z-Bolt S400 | 0.4, 0.6 and 0.8 mm | 400 x 400 x 700 mm | 0.08 to 0.48 mm | .gcode |
| Z-Bolt S400 Dual | 0.4, 0.6 and 0.8 mm | 400 x 400 x 700 mm | 0.08 to 0.48 mm | .gcode |
| Z-Bolt S600 | 0.4, 0.6 and 0.8 mm | 600 x 600 x 900 mm | 0.12 to 0.48 mm | .gcode |
| Z-Bolt S600 Dual | 0.4, 0.6 and 0.8 mm | 600 x 600 x 900 mm | 0.12 to 0.48 mm | .gcode |
| Z-Bolt S800 Dual | 0.4, 0.6 and 0.8 mm | 802 x 802 x 802 mm | 0.12 to 0.48 mm | .gcode |
| Z-Bolt S1000 | 0.4, 0.6 and 0.8 mm | 1000 x 1000 x 1000 mm | 0.12 to 0.48 mm | .gcode |
| Z-Bolt S1000 Dual | 0.4, 0.6 and 0.8 mm | 1000 x 1000 x 1000 mm | 0.12 to 0.48 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the Z-Bolt S300 and its nozzle (0.4, 0.6 and 0.8 mm), choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the Z-Bolt S300's OrcaSlicer 2.4.2 profile (300 x 300 x 350 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the Z-Bolt S300 Dual's own OrcaSlicer profile. Copy it to the printer's SD card or USB drive, or upload it through the printer's web interface or print server, if it has one.
9 models: S300, S300 Dual, S400, S400 Dual, S600, S600 Dual, S800 Dual, S1000 and S1000 Dual.
The Z-Bolt S1000: 1000 x 1000 x 1000 mm in its OrcaSlicer profile. The smallest is the Z-Bolt S300 Dual, 300 x 300 x 350 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
Nozzles of 0.4 mm (9 models), 0.6 mm (9 models) and 0.8 mm (9 models). The print presets go from 0.08 to 0.48 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.