Online slicer for Voron printers
Upload an STL or 3MF, pick your Voron printer among 8 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.Voron in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 8 |
| Nozzle sizes | 0.15, 0.2, 0.25, 0.4, 0.5, 0.6, 0.8 and 1 mm |
| Largest printable area | 350 x 350 x 325 mm (Voron 2.4 350) |
| Smallest printable area | 120 x 120 x 120 mm (Voron 0.1) |
| Layer heights in the print presets | 0.05 to 0.6 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled Voron presets |
Getting the file to a Voron printer
Voron printers are open-source kits built by their owners, and almost all of them run Klipper. The .gcode file goes to the printer through Mainsail or Fluidd in a browser on the local network (upload, then print). Because every Voron's configuration is its own, check that the start G-code macro the profile calls (Voron configurations usually name it PRINT_START) exists in your printer.cfg before the first print.Every Voron printer in the slicer (8)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF. Linked models have a page of their own.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| Voron 0.1 | 0.15, 0.2, 0.25, 0.4, 0.5, 0.6, 0.8 and 1 mm | 120 x 120 x 120 mm | 0.05 to 0.6 mm | .gcode |
| Voron 2.4 250 | 0.15, 0.2, 0.25, 0.4, 0.5, 0.6, 0.8 and 1 mm | 250 x 250 x 225 mm | 0.05 to 0.6 mm | .gcode |
| Voron 2.4 300 | 0.15, 0.2, 0.25, 0.4, 0.5, 0.6, 0.8 and 1 mm | 300 x 300 x 275 mm | 0.05 to 0.6 mm | .gcode |
| Voron 2.4 350 | 0.15, 0.2, 0.25, 0.4, 0.5, 0.6, 0.8 and 1 mm | 350 x 350 x 325 mm | 0.05 to 0.6 mm | .gcode |
| Voron Switchwire 250 | 0.15, 0.2, 0.25, 0.4, 0.5, 0.6, 0.8 and 1 mm | 250 x 210 x 240 mm | 0.05 to 0.6 mm | .gcode |
| Voron Trident 250 | 0.15, 0.2, 0.25, 0.4, 0.5, 0.6, 0.8 and 1 mm | 250 x 250 x 250 mm | 0.05 to 0.6 mm | .gcode |
| Voron Trident 300 | 0.15, 0.2, 0.25, 0.4, 0.5, 0.6, 0.8 and 1 mm | 300 x 300 x 250 mm | 0.05 to 0.6 mm | .gcode |
| Voron Trident 350 | 0.15, 0.2, 0.25, 0.4, 0.5, 0.6, 0.8 and 1 mm | 350 x 350 x 250 mm | 0.05 to 0.6 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the Voron 2.4 350 and its nozzle (0.15, 0.2, 0.25, 0.4, 0.5, 0.6, 0.8 and 1 mm), choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the Voron 2.4 350's OrcaSlicer 2.4.2 profile (350 x 350 x 325 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the Voron Trident 300's own OrcaSlicer profile. Copy it to the printer's storage (memory card or USB drive) or upload it through the printer's web interface or app, where the model has one.
8 models: 0.1, 2.4 250, 2.4 300, 2.4 350, Switchwire 250, Trident 250, Trident 300 and Trident 350. Voron 2.4 350 has a page of its own with the bed size, layer heights and prompts sized for it.
The Voron 2.4 350: 350 x 350 x 325 mm in its OrcaSlicer profile. The smallest is the Voron 0.1, 120 x 120 x 120 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
Nozzles of 0.15 mm (8 models), 0.2 mm (8 models), 0.25 mm (8 models), 0.4 mm (8 models), 0.5 mm (8 models), 0.6 mm (8 models), 0.8 mm (8 models) and 1 mm (8 models). The print presets go from 0.05 to 0.6 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.