Online slicer for SeeMeCNC printers
Upload an STL or 3MF, pick your SeeMeCNC printer among 7 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.SeeMeCNC in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 7 |
| Nozzle sizes | 0.4, 0.5, 0.7 and 1 mm |
| Largest printable area | 500 x 500 x 2100 mm (SeeMeCNC BOSSdelta 500 0521) |
| Smallest printable area | 270 x 270 x 385 mm (SeeMeCNC RostockMAX v3.2) |
| Layer heights in the print presets | 0.16 to 0.7 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled SeeMeCNC presets |
Every SeeMeCNC printer in the slicer (7)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| SeeMeCNC Artemis 300 | 0.4, 0.5, 0.7 and 1 mm | 290 x 290 x 500 mm | 0.16 to 0.7 mm | .gcode |
| SeeMeCNC BOSSdelta 300 | 0.4, 0.5, 0.7 and 1 mm | 300 x 300 x 495 mm | 0.16 to 0.7 mm | .gcode |
| SeeMeCNC BOSSdelta 500 0505 | 0.4, 0.5, 0.7 and 1 mm | 500 x 500 x 500 mm | 0.16 to 0.7 mm | .gcode |
| SeeMeCNC BOSSdelta 500 0510 | 0.4, 0.5, 0.7 and 1 mm | 500 x 500 x 1000 mm | 0.16 to 0.7 mm | .gcode |
| SeeMeCNC BOSSdelta 500 0521 | 0.4, 0.5, 0.7 and 1 mm | 500 x 500 x 2100 mm | 0.16 to 0.7 mm | .gcode |
| SeeMeCNC RostockMAX v3.2 | 0.4, 0.5, 0.7 and 1 mm | 270 x 270 x 385 mm | 0.16 to 0.7 mm | .gcode |
| SeeMeCNC RostockMAX v4 | 0.4, 0.5, 0.7 and 1 mm | 280 x 280 x 385 mm | 0.16 to 0.7 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the SeeMeCNC Artemis 300 and its nozzle (0.4, 0.5, 0.7 and 1 mm), choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the SeeMeCNC Artemis 300's OrcaSlicer 2.4.2 profile (290 x 290 x 500 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the SeeMeCNC BOSSdelta 300's own OrcaSlicer profile. Copy it to the printer's SD card or USB drive, or upload it through the printer's web interface or print server, if it has one.
7 models: Artemis 300, BOSSdelta 300, BOSSdelta 500 0505, BOSSdelta 500 0510, BOSSdelta 500 0521, RostockMAX v3.2 and RostockMAX v4.
The SeeMeCNC BOSSdelta 500 0521: 500 x 500 x 2100 mm in its OrcaSlicer profile. The smallest is the SeeMeCNC RostockMAX v3.2, 270 x 270 x 385 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
Nozzles of 0.4 mm (7 models), 0.5 mm (7 models), 0.7 mm (7 models) and 1 mm (7 models). The print presets go from 0.16 to 0.7 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.