Online slicer for Vzbot printers
Upload an STL or 3MF, pick your Vzbot printer among 2 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.Vzbot in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 2 |
| Nozzle sizes | 0.4, 0.5 and 0.6 mm |
| Largest printable area | 330 x 330 x 400 mm (Vzbot 330 AWD) |
| Smallest printable area | 235 x 235 x 200 mm (Vzbot 235 AWD) |
| Layer heights in the print presets | 0.08 to 0.28 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled Vzbot presets |
Every Vzbot printer in the slicer (2)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| Vzbot 235 AWD | 0.4, 0.5 and 0.6 mm | 235 x 235 x 200 mm | 0.08 to 0.28 mm | .gcode |
| Vzbot 330 AWD | 0.4, 0.5 and 0.6 mm | 330 x 330 x 400 mm | 0.08 to 0.28 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the Vzbot 235 AWD and its nozzle (0.4, 0.5 and 0.6 mm), choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the Vzbot 235 AWD's OrcaSlicer 2.4.2 profile (235 x 235 x 200 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the Vzbot 330 AWD's own OrcaSlicer profile. Copy it to the printer's SD card or USB drive, or upload it through the printer's web interface or print server, if it has one.
2 models: 235 AWD and 330 AWD.
The Vzbot 330 AWD: 330 x 330 x 400 mm in its OrcaSlicer profile. The smallest is the Vzbot 235 AWD, 235 x 235 x 200 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
Nozzles of 0.4 mm (2 models), 0.5 mm (2 models) and 0.6 mm (2 models). The print presets go from 0.08 to 0.28 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.