Online slicer for TwoTrees printers
Upload an STL or 3MF, pick your TwoTrees printer among 2 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.TwoTrees in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 2 |
| Nozzle sizes | 0.4 mm |
| Largest printable area | 310 x 310 x 350 mm (TwoTrees SP-5 Klipper) |
| Smallest printable area | 256 x 256 x 256 mm (TwoTrees SK1) |
| Layer heights in the print presets | 0.08 to 0.28 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled TwoTrees presets |
Every TwoTrees printer in the slicer (2)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| TwoTrees SK1 | 0.4 mm | 256 x 256 x 256 mm | 0.08 to 0.28 mm | .gcode |
| TwoTrees SP-5 Klipper | 0.4 mm | 310 x 310 x 350 mm | 0.08 to 0.28 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the TwoTrees SK1, choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the TwoTrees SK1's OrcaSlicer 2.4.2 profile (256 x 256 x 256 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the TwoTrees SP-5 Klipper's own OrcaSlicer profile. Copy it to the printer's SD card or USB drive, or upload it through the printer's web interface or print server, if it has one.
2 models: SK1 and SP-5 Klipper.
The TwoTrees SP-5 Klipper: 310 x 310 x 350 mm in its OrcaSlicer profile. The smallest is the TwoTrees SK1, 256 x 256 x 256 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
A 0.4 mm nozzle on every model. The print presets go from 0.08 to 0.28 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.