Online slicer for WEMAKE3D printers
Upload an STL or 3MF, pick your WEMAKE3D printer among 2 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.WEMAKE3D in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 2 |
| Nozzle sizes | 0.2, 0.3, 0.4 and 0.6 mm |
| Largest printable area | 300 x 300 x 400 mm (WEMAKE3D PhoenixProV1) |
| Smallest printable area | 210 x 210 x 400 mm (WEMAKE3D TinyBotV1) |
| Layer heights in the print presets | 0.06 to 0.4 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled WEMAKE3D presets |
Every WEMAKE3D printer in the slicer (2)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| WEMAKE3D PhoenixProV1 | 0.2, 0.3, 0.4 and 0.6 mm | 300 x 300 x 400 mm | 0.06 to 0.4 mm | .gcode |
| WEMAKE3D TinyBotV1 | 0.2, 0.3, 0.4 and 0.6 mm | 210 x 210 x 400 mm | 0.06 to 0.4 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the WEMAKE3D PhoenixProV1 and its nozzle (0.2, 0.3, 0.4 and 0.6 mm), choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the WEMAKE3D PhoenixProV1's OrcaSlicer 2.4.2 profile (300 x 300 x 400 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the WEMAKE3D TinyBotV1's own OrcaSlicer profile. Copy it to the printer's SD card or USB drive, or upload it through the printer's web interface or print server, if it has one.
2 models: PhoenixProV1 and TinyBotV1.
The WEMAKE3D PhoenixProV1: 300 x 300 x 400 mm in its OrcaSlicer profile. The smallest is the WEMAKE3D TinyBotV1, 210 x 210 x 400 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
Nozzles of 0.2 mm (2 models), 0.3 mm (2 models), 0.4 mm (2 models) and 0.6 mm (2 models). The print presets go from 0.06 to 0.4 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.