Online slicer · Creality
Online slicer for Creality printers
Upload an STL or 3MF, pick your Creality printer among 41 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.SpeakCAD's online slicer has OrcaSlicer 2.4.2 profiles for 41 Creality printer models. 5 of them have pages of their own on SpeakCAD. Nozzle profiles go from 0.2 to 1 mm (0.2, 0.25, 0.3, 0.4, 0.5, 0.6, 0.8 and 1 mm); all 41 models have a 0.4 mm one. The largest printable area in the profiles is 450 x 450 x 470 mm, on the Creality CR-10 Max; the smallest is 175 x 175 x 165 mm, on the Creality Sermoon V1. The print presets cover layer heights from 0.06 to 0.56 mm. Every Creality profile slices to a plain .gcode file.The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.
Creality in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 41 |
| Nozzle sizes | 0.2, 0.25, 0.3, 0.4, 0.5, 0.6, 0.8 and 1 mm |
| Largest printable area | 450 x 450 x 470 mm (Creality CR-10 Max) |
| Smallest printable area | 175 x 175 x 165 mm (Creality Sermoon V1) |
| Layer heights in the print presets | 0.06 to 0.56 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled Creality presets |
Getting the file to a Creality printer
Creality's printers come in two firmware families. The classic Ender and CR models run Marlin-based firmware and print from a memory card or USB drive, depending on the model. The K1 family, the K2 family and some newer Ender-3 V3 models run Creality's Klipper-based firmware and also receive files over the network from Creality Print or Creality Cloud. The catalog has separate profiles for several K1 models with Creality's CFS filament system (the names ending in CFS-C); pick the one that matches your setup.Every Creality printer in the slicer (41)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF. Linked models have a page of their own.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| Creality CR-6 Max | 0.2, 0.4, 0.6 and 0.8 mm | 390 x 390 x 400 mm | 0.08 to 0.56 mm | .gcode |
| Creality CR-6 SE | 0.2, 0.4, 0.6 and 0.8 mm | 225 x 235 x 250 mm | 0.08 to 0.56 mm | .gcode |
| Creality CR-10 Max | 0.4 mm | 450 x 450 x 470 mm | 0.12 to 0.24 mm | .gcode |
| Creality CR-10 SE | 0.2, 0.4, 0.6 and 0.8 mm | 220 x 220 x 265 mm | 0.12 to 0.24 mm | .gcode |
| Creality CR-10 V2 | 0.4 mm | 300 x 300 x 400 mm | 0.16 to 0.2 mm | .gcode |
| Creality CR-10 V3 | 0.4 and 0.6 mm | 300 x 300 x 400 mm | 0.2 to 0.2 mm | .gcode |
| Creality CR-M4 | 0.4 mm | 450 x 450 x 470 mm | 0.1 to 0.2 mm | .gcode |
| Creality Ender-3 | 0.2, 0.4, 0.6 and 0.8 mm | 220 x 220 x 250 mm | 0.12 to 0.28 mm | .gcode |
| Creality Ender-3 Pro | 0.2, 0.4, 0.6 and 0.8 mm | 220 x 220 x 250 mm | 0.12 to 0.28 mm | .gcode |
| Creality Ender-3 S1 | 0.4 mm | 220 x 220 x 270 mm | 0.16 to 0.2 mm | .gcode |
| Creality Ender-3 S1 Plus | 0.2, 0.4, 0.6 and 0.8 mm | 300 x 300 x 300 mm | 0.16 to 0.24 mm | .gcode |
| Creality Ender-3 S1 Pro | 0.4 mm | 220 x 220 x 270 mm | 0.16 to 0.2 mm | .gcode |
| Creality Ender-3 V2 | 0.4 mm | 220 x 220 x 250 mm | 0.12 to 0.24 mm | .gcode |
| Creality Ender-3 V2 Neo | 0.4 mm | 220 x 220 x 250 mm | 0.12 to 0.24 mm | .gcode |
| Creality Ender-3 V3 | 0.4 and 0.6 mm | 220 x 220 x 250 mm | 0.12 to 0.36 mm | .gcode |
| Creality Ender-3 V3 KE | 0.2, 0.4, 0.6 and 0.8 mm | 220 x 220 x 245 mm | 0.12 to 0.24 mm | .gcode |
| Creality Ender-3 V3 Plus | 0.4 and 0.6 mm | 300 x 300 x 330 mm | 0.12 to 0.36 mm | .gcode |
| Creality Ender-3 V3 SE | 0.2, 0.4, 0.6 and 0.8 mm | 220 x 220 x 250 mm | 0.12 to 0.24 mm | .gcode |
| Creality Ender-3 V4 | 0.4 mm | 235 mm tall (bed size not in the profile) | 0.16 to 0.28 mm | .gcode |
| Creality Ender-5 | 0.4 mm | 220 x 220 x 300 mm | 0.16 to 0.2 mm | .gcode |
| Creality Ender-5 Max | 0.4, 0.6 and 0.8 mm | 400 mm tall (bed size not in the profile) | 0.2 to 0.4 mm | .gcode |
| Creality Ender-5 Plus | 0.4 mm | 350 x 350 x 400 mm | 0.16 to 0.2 mm | .gcode |
| Creality Ender-5 Pro (2019) | 0.2, 0.25, 0.3, 0.4, 0.5, 0.6, 0.8 and 1 mm | 220 x 220 x 300 mm | 0.08 to 0.36 mm | .gcode |
| Creality Ender-5 S1 | 0.4 mm | 220 x 220 x 300 mm | 0.16 to 0.2 mm | .gcode |
| Creality Ender-5S | 0.4 mm | 220 x 220 x 300 mm | 0.16 to 0.2 mm | .gcode |
| Creality Ender-6 | 0.4 mm | 250 x 250 x 400 mm | 0.16 to 0.2 mm | .gcode |
| Creality Hi | 0.2, 0.4, 0.6 and 0.8 mm | 300 mm tall (bed size not in the profile) or 260 x 260 x 300 mm | 0.08 to 0.4 mm | .gcode |
| Creality K1 | 0.4, 0.6 and 0.8 mm | 220 x 220 x 250 mm | 0.08 to 0.48 mm | .gcode |
| Creality K1 Max | 0.4, 0.6 and 0.8 mm | 300 x 300 x 300 mm | 0.08 to 0.48 mm | .gcode |
| Creality K1 Max_CFS-C | 0.4 mm | 300 mm tall (bed size not in the profile) | 0.08 to 0.24 mm | .gcode |
| Creality K1 SE | 0.4 and 0.6 mm | 220 x 220 x 250 mm or 250 mm tall (bed size not in the profile) | 0.12 to 0.3 mm | .gcode |
| Creality K1 SE_CFS-C | 0.4 mm | 250 mm tall (bed size not in the profile) | 0.16 to 0.24 mm | .gcode |
| Creality K1_CFS-C | 0.4 mm | 250 mm tall (bed size not in the profile) | 0.08 to 0.24 mm | .gcode |
| Creality K1C | 0.4, 0.6 and 0.8 mm | 220 x 220 x 250 mm | 0.08 to 0.48 mm | .gcode |
| Creality K1C_CFS-C | 0.4 mm | 250 mm tall (bed size not in the profile) | 0.08 to 0.24 mm | .gcode |
| Creality K2 | 0.2, 0.4, 0.6 and 0.8 mm | 260 x 260 x 260 mm | 0.08 to 0.56 mm | .gcode |
| Creality K2 Plus | 0.2, 0.4, 0.6 and 0.8 mm | 350 x 350 x 350 mm | 0.06 to 0.56 mm | .gcode |
| Creality K2 Pro | 0.2, 0.4, 0.6 and 0.8 mm | 300 x 300 x 300 mm | 0.08 to 0.56 mm | .gcode |
| Creality K2 SE | 0.4 mm | 245 mm tall (bed size not in the profile) | 0.16 to 0.24 mm | .gcode |
| Creality Sermoon V1 | 0.4 mm | 175 x 175 x 165 mm | 0.16 to 0.28 mm | .gcode |
| Creality SPARKX i7 | 0.2, 0.4, 0.6 and 0.8 mm | 255 mm tall (bed size not in the profile) | 0.08 to 0.4 mm | .gcode |
Creality CR-6 MaxNozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 390 x 390 x 400 mmLayer heights: 0.08 to 0.56 mm · .gcode
Creality CR-6 SENozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 225 x 235 x 250 mmLayer heights: 0.08 to 0.56 mm · .gcode
Creality CR-10 MaxNozzles: 0.4 mmPrintable area: 450 x 450 x 470 mmLayer heights: 0.12 to 0.24 mm · .gcode
Creality CR-10 SENozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 220 x 220 x 265 mmLayer heights: 0.12 to 0.24 mm · .gcode
Creality CR-10 V2Nozzles: 0.4 mmPrintable area: 300 x 300 x 400 mmLayer heights: 0.16 to 0.2 mm · .gcode
Creality CR-10 V3Nozzles: 0.4 and 0.6 mmPrintable area: 300 x 300 x 400 mmLayer heights: 0.2 to 0.2 mm · .gcode
Creality CR-M4Nozzles: 0.4 mmPrintable area: 450 x 450 x 470 mmLayer heights: 0.1 to 0.2 mm · .gcode
Creality Ender-3Nozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 220 x 220 x 250 mmLayer heights: 0.12 to 0.28 mm · .gcode
Creality Ender-3 ProNozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 220 x 220 x 250 mmLayer heights: 0.12 to 0.28 mm · .gcode
Creality Ender-3 S1Nozzles: 0.4 mmPrintable area: 220 x 220 x 270 mmLayer heights: 0.16 to 0.2 mm · .gcode
Creality Ender-3 S1 PlusNozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 300 x 300 x 300 mmLayer heights: 0.16 to 0.24 mm · .gcode
Creality Ender-3 S1 ProNozzles: 0.4 mmPrintable area: 220 x 220 x 270 mmLayer heights: 0.16 to 0.2 mm · .gcode
Creality Ender-3 V2Nozzles: 0.4 mmPrintable area: 220 x 220 x 250 mmLayer heights: 0.12 to 0.24 mm · .gcode
Creality Ender-3 V2 NeoNozzles: 0.4 mmPrintable area: 220 x 220 x 250 mmLayer heights: 0.12 to 0.24 mm · .gcode
Creality Ender-3 V3Nozzles: 0.4 and 0.6 mmPrintable area: 220 x 220 x 250 mmLayer heights: 0.12 to 0.36 mm · .gcode
Creality Ender-3 V3 KENozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 220 x 220 x 245 mmLayer heights: 0.12 to 0.24 mm · .gcode
Creality Ender-3 V3 PlusNozzles: 0.4 and 0.6 mmPrintable area: 300 x 300 x 330 mmLayer heights: 0.12 to 0.36 mm · .gcode
Creality Ender-3 V3 SENozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 220 x 220 x 250 mmLayer heights: 0.12 to 0.24 mm · .gcode
Creality Ender-3 V4Nozzles: 0.4 mmPrintable area: 235 mm tall (bed size not in the profile)Layer heights: 0.16 to 0.28 mm · .gcode
Creality Ender-5Nozzles: 0.4 mmPrintable area: 220 x 220 x 300 mmLayer heights: 0.16 to 0.2 mm · .gcode
Creality Ender-5 MaxNozzles: 0.4, 0.6 and 0.8 mmPrintable area: 400 mm tall (bed size not in the profile)Layer heights: 0.2 to 0.4 mm · .gcode
Creality Ender-5 PlusNozzles: 0.4 mmPrintable area: 350 x 350 x 400 mmLayer heights: 0.16 to 0.2 mm · .gcode
Creality Ender-5 Pro (2019)Nozzles: 0.2, 0.25, 0.3, 0.4, 0.5, 0.6, 0.8 and 1 mmPrintable area: 220 x 220 x 300 mmLayer heights: 0.08 to 0.36 mm · .gcode
Creality Ender-5 S1Nozzles: 0.4 mmPrintable area: 220 x 220 x 300 mmLayer heights: 0.16 to 0.2 mm · .gcode
Creality Ender-5SNozzles: 0.4 mmPrintable area: 220 x 220 x 300 mmLayer heights: 0.16 to 0.2 mm · .gcode
Creality Ender-6Nozzles: 0.4 mmPrintable area: 250 x 250 x 400 mmLayer heights: 0.16 to 0.2 mm · .gcode
Creality HiNozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 300 mm tall (bed size not in the profile) or 260 x 260 x 300 mmLayer heights: 0.08 to 0.4 mm · .gcode
Creality K1Nozzles: 0.4, 0.6 and 0.8 mmPrintable area: 220 x 220 x 250 mmLayer heights: 0.08 to 0.48 mm · .gcode
Creality K1 MaxNozzles: 0.4, 0.6 and 0.8 mmPrintable area: 300 x 300 x 300 mmLayer heights: 0.08 to 0.48 mm · .gcode
Creality K1 Max_CFS-CNozzles: 0.4 mmPrintable area: 300 mm tall (bed size not in the profile)Layer heights: 0.08 to 0.24 mm · .gcode
Creality K1 SENozzles: 0.4 and 0.6 mmPrintable area: 220 x 220 x 250 mm or 250 mm tall (bed size not in the profile)Layer heights: 0.12 to 0.3 mm · .gcode
Creality K1 SE_CFS-CNozzles: 0.4 mmPrintable area: 250 mm tall (bed size not in the profile)Layer heights: 0.16 to 0.24 mm · .gcode
Creality K1_CFS-CNozzles: 0.4 mmPrintable area: 250 mm tall (bed size not in the profile)Layer heights: 0.08 to 0.24 mm · .gcode
Creality K1CNozzles: 0.4, 0.6 and 0.8 mmPrintable area: 220 x 220 x 250 mmLayer heights: 0.08 to 0.48 mm · .gcode
Creality K1C_CFS-CNozzles: 0.4 mmPrintable area: 250 mm tall (bed size not in the profile)Layer heights: 0.08 to 0.24 mm · .gcode
Creality K2Nozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 260 x 260 x 260 mmLayer heights: 0.08 to 0.56 mm · .gcode
Creality K2 PlusNozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 350 x 350 x 350 mmLayer heights: 0.06 to 0.56 mm · .gcode
Creality K2 ProNozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 300 x 300 x 300 mmLayer heights: 0.08 to 0.56 mm · .gcode
Creality K2 SENozzles: 0.4 mmPrintable area: 245 mm tall (bed size not in the profile)Layer heights: 0.16 to 0.24 mm · .gcode
Creality Sermoon V1Nozzles: 0.4 mmPrintable area: 175 x 175 x 165 mmLayer heights: 0.16 to 0.28 mm · .gcode
Creality SPARKX i7Nozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 255 mm tall (bed size not in the profile)Layer heights: 0.08 to 0.4 mm · .gcode
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the Creality K1C and its nozzle (0.4, 0.6 and 0.8 mm), choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the Creality K1C's OrcaSlicer 2.4.2 profile (220 x 220 x 250 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the Creality Ender-3 V3 SE's own OrcaSlicer profile. Copy it to the printer's storage (memory card or USB drive) or upload it through the printer's web interface or app, where the model has one.
41 models: CR-6 Max, CR-6 SE, CR-10 Max, CR-10 SE, CR-10 V2, CR-10 V3, CR-M4, Ender-3, Ender-3 Pro, Ender-3 S1, Ender-3 S1 Plus, Ender-3 S1 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender-3 V3, Ender-3 V3 KE, Ender-3 V3 Plus, Ender-3 V3 SE, Ender-3 V4, Ender-5, Ender-5 Max, Ender-5 Plus, Ender-5 Pro (2019), Ender-5 S1, Ender-5S, Ender-6, Hi, K1, K1 Max, K1 Max_CFS-C, K1 SE, K1 SE_CFS-C, K1_CFS-C, K1C, K1C_CFS-C, K2, K2 Plus, K2 Pro, K2 SE, Sermoon V1 and SPARKX i7. Creality Ender-3, Creality Ender-3 V3 KE, Creality Ender-3 V3 SE, Creality K1C and Creality K2 Plus have a page of their own with the bed size, layer heights and prompts sized for them.
The Creality CR-10 Max: 450 x 450 x 470 mm in its OrcaSlicer profile. The smallest is the Creality Sermoon V1, 175 x 175 x 165 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
Nozzles of 0.2 mm (14 models), 0.25 mm (1 model), 0.3 mm (1 model), 0.4 mm (41 models), 0.5 mm (1 model), 0.6 mm (22 models), 0.8 mm (18 models) and 1 mm (1 model). The print presets go from 0.06 to 0.56 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.
Other printer brands
RatRig 21Volumic 21Anycubic 20Snapmaker 19Elegoo 18Wanhao France 17Geeetech 16Prusa 13Sovol 13Bambu Lab 12Flashforge 12Qidi 11Artillery 10Z-Bolt 9Voron 8SeeMeCNC 7FLSun 6re3D 6CoLiDo 5Generic profiles 5MagicMaker 5FlyingBear 4InfiMech 4Kingroon 4Lulzbot 4Tiertime 4Anker 3BIQU 3Blocks 3Cubicon 3DeltaMaker 3Dremel 3Eryone 3Folgertech 3WonderMaker 3Comgrow 2CONSTRUCT3D 2innovatiQ 2LH 2LONGER 2Raise3D 2RolohaunDesign 2SecKit 2TwoTrees 2Vivedino 2Vzbot 2WEMAKE3D 2
Read more
Creality Ender-3Custom parts and G-code for the Creality Ender-3, with the bed size from its profile.Creality Ender-3 V3 KECustom parts and G-code for the Creality Ender-3 V3 KE, with the bed size from its profile.Creality Ender-3 V3 SECustom parts and G-code for the Creality Ender-3 V3 SE, with the bed size from its profile.Creality K1CCustom parts and G-code for the Creality K1C, with the bed size from its profile.Creality K2 PlusCustom parts and G-code for the Creality K2 Plus, with the bed size from its profile.Online slicerWhat the online slicer does, the settings it has and what it costs.Every printerAll the printers the slicer has a profile for, by brand.STL to G-codeWhat the conversion does, and the settings that matter.From a phone to the slicerGetting the file from Files or Downloads onto the printer.