Online slicer for Eryone printers
Upload an STL or 3MF, pick your Eryone printer among 3 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.Eryone in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 3 |
| Nozzle sizes | 0.2, 0.4, 0.5, 0.6 and 0.8 mm |
| Largest printable area | 400 x 400 x 400 mm (Thinker X400) |
| Smallest printable area | 243 x 220 x 190 mm (Eryone ER20 Klipper) |
| Layer heights in the print presets | 0.06 to 0.56 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled Eryone presets |
Every Eryone printer in the slicer (3)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| Eryone ER20 | 0.2, 0.4, 0.5, 0.6 and 0.8 mm | 243 x 220 x 200 mm | 0.06 to 0.56 mm | .gcode |
| Eryone ER20 Klipper | 0.2, 0.4, 0.5, 0.6 and 0.8 mm | 243 x 220 x 190 mm | 0.06 to 0.56 mm | .gcode |
| Thinker X400 | 0.2 and 0.4 mm | 400 x 400 x 400 mm | 0.1 to 0.24 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the Eryone ER20 and its nozzle (0.2, 0.4, 0.5, 0.6 and 0.8 mm), choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the Eryone ER20's OrcaSlicer 2.4.2 profile (243 x 220 x 200 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the Eryone ER20 Klipper's own OrcaSlicer profile. Copy it to the printer's SD card or USB drive, or upload it through the printer's web interface or print server, if it has one.
3 models: ER20, ER20 Klipper and Thinker X400.
The Eryone Thinker X400: 400 x 400 x 400 mm in its OrcaSlicer profile. The smallest is the Eryone ER20 Klipper, 243 x 220 x 190 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
Nozzles of 0.2 mm (3 models), 0.4 mm (3 models), 0.5 mm (2 models), 0.6 mm (2 models) and 0.8 mm (2 models). The print presets go from 0.06 to 0.56 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.