Online slicer · RatRig
Online slicer for RatRig printers
Upload an STL or 3MF, pick your RatRig printer among 21 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.SpeakCAD's online slicer has OrcaSlicer 2.4.2 profiles for 21 RatRig printer models. Nozzle profiles go from 0.4 to 0.8 mm (0.4, 0.5, 0.6 and 0.8 mm); all 21 models have a 0.4 mm one. The largest printable area in the profiles is 500 x 500 x 500 mm, on the RatRig V-Core 3 500; the smallest is 180 x 180 x 180 mm, on the RatRig V-Minion. The print presets cover layer heights from 0.08 to 0.35 mm. Every RatRig profile slices to a plain .gcode file.The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.
RatRig in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 21 |
| Nozzle sizes | 0.4, 0.5, 0.6 and 0.8 mm |
| Largest printable area | 500 x 500 x 500 mm (RatRig V-Core 3 500) |
| Smallest printable area | 180 x 180 x 180 mm (RatRig V-Minion) |
| Layer heights in the print presets | 0.08 to 0.35 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled RatRig presets |
Getting the file to a RatRig printer
RatRig printers are kits that usually run RatOS, a Klipper distribution with the Mainsail web interface: upload the .gcode from a browser on the local network. The V-Core 4 IDEX has separate profiles for copy and mirror mode, where both toolheads print the same part at once; pick the one for the mode you print in. If your configuration is not stock RatOS, check that the start G-code macro the profile calls exists in it.Every RatRig printer in the slicer (21)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| RatRig V-Cast | 0.4 and 0.6 mm | 300 x 300 x 250 mm | 0.08 to 0.28 mm | .gcode |
| RatRig V-Core 3 200 | 0.4 mm | 200 x 200 x 200 mm | 0.08 to 0.28 mm | .gcode |
| RatRig V-Core 3 300 | 0.4 mm | 300 x 300 x 300 mm | 0.08 to 0.28 mm | .gcode |
| RatRig V-Core 3 400 | 0.4 mm | 400 x 400 x 400 mm | 0.08 to 0.28 mm | .gcode |
| RatRig V-Core 3 500 | 0.4 mm | 500 x 500 x 500 mm | 0.08 to 0.28 mm | .gcode |
| RatRig V-Core 4 300 | 0.4, 0.5 and 0.6 mm | 300 x 300 x 300 mm | 0.2 to 0.3 mm | .gcode |
| RatRig V-Core 4 400 | 0.4, 0.5 and 0.6 mm | 400 x 400 x 300 mm | 0.2 to 0.3 mm | .gcode |
| RatRig V-Core 4 500 | 0.4, 0.5 and 0.6 mm | 500 x 500 x 500 mm or 500 x 500 x 300 mm | 0.2 to 0.3 mm | .gcode |
| RatRig V-Core 4 HYBRID 300 | 0.4, 0.5, 0.6 and 0.8 mm | 300 x 300 x 300 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 HYBRID 400 | 0.4, 0.5, 0.6 and 0.8 mm | 400 x 400 x 400 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 HYBRID 500 | 0.4, 0.5, 0.6 and 0.8 mm | 500 x 500 x 500 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 IDEX 300 | 0.4, 0.5, 0.6 and 0.8 mm | 300 x 300 x 300 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 IDEX 300 COPY MODE | 0.4, 0.5, 0.6 and 0.8 mm | 150 x 300 x 300 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 IDEX 300 MIRROR MODE | 0.4, 0.5, 0.6 and 0.8 mm | 120 x 300 x 300 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 IDEX 400 | 0.4, 0.5, 0.6 and 0.8 mm | 400 x 400 x 400 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 IDEX 400 COPY MODE | 0.4, 0.5, 0.6 and 0.8 mm | 200 x 400 x 400 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 IDEX 400 MIRROR MODE | 0.4, 0.5, 0.6 and 0.8 mm | 170 x 400 x 400 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 IDEX 500 | 0.4, 0.5, 0.6 and 0.8 mm | 500 x 500 x 500 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 IDEX 500 COPY MODE | 0.4, 0.5, 0.6 and 0.8 mm | 250 x 500 x 500 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Core 4 IDEX 500 MIRROR MODE | 0.4, 0.5, 0.6 and 0.8 mm | 220 x 500 x 500 mm | 0.2 to 0.35 mm | .gcode |
| RatRig V-Minion | 0.4 mm | 180 x 180 x 180 mm | 0.08 to 0.28 mm | .gcode |
RatRig V-CastNozzles: 0.4 and 0.6 mmPrintable area: 300 x 300 x 250 mmLayer heights: 0.08 to 0.28 mm · .gcode
RatRig V-Core 3 200Nozzles: 0.4 mmPrintable area: 200 x 200 x 200 mmLayer heights: 0.08 to 0.28 mm · .gcode
RatRig V-Core 3 300Nozzles: 0.4 mmPrintable area: 300 x 300 x 300 mmLayer heights: 0.08 to 0.28 mm · .gcode
RatRig V-Core 3 400Nozzles: 0.4 mmPrintable area: 400 x 400 x 400 mmLayer heights: 0.08 to 0.28 mm · .gcode
RatRig V-Core 3 500Nozzles: 0.4 mmPrintable area: 500 x 500 x 500 mmLayer heights: 0.08 to 0.28 mm · .gcode
RatRig V-Core 4 300Nozzles: 0.4, 0.5 and 0.6 mmPrintable area: 300 x 300 x 300 mmLayer heights: 0.2 to 0.3 mm · .gcode
RatRig V-Core 4 400Nozzles: 0.4, 0.5 and 0.6 mmPrintable area: 400 x 400 x 300 mmLayer heights: 0.2 to 0.3 mm · .gcode
RatRig V-Core 4 500Nozzles: 0.4, 0.5 and 0.6 mmPrintable area: 500 x 500 x 500 mm or 500 x 500 x 300 mmLayer heights: 0.2 to 0.3 mm · .gcode
RatRig V-Core 4 HYBRID 300Nozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 300 x 300 x 300 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 HYBRID 400Nozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 400 x 400 x 400 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 HYBRID 500Nozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 500 x 500 x 500 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 IDEX 300Nozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 300 x 300 x 300 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 IDEX 300 COPY MODENozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 150 x 300 x 300 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 IDEX 300 MIRROR MODENozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 120 x 300 x 300 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 IDEX 400Nozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 400 x 400 x 400 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 IDEX 400 COPY MODENozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 200 x 400 x 400 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 IDEX 400 MIRROR MODENozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 170 x 400 x 400 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 IDEX 500Nozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 500 x 500 x 500 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 IDEX 500 COPY MODENozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 250 x 500 x 500 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-Core 4 IDEX 500 MIRROR MODENozzles: 0.4, 0.5, 0.6 and 0.8 mmPrintable area: 220 x 500 x 500 mmLayer heights: 0.2 to 0.35 mm · .gcode
RatRig V-MinionNozzles: 0.4 mmPrintable area: 180 x 180 x 180 mmLayer heights: 0.08 to 0.28 mm · .gcode
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the RatRig V-Core 4 300 and its nozzle (0.4, 0.5 and 0.6 mm), choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the RatRig V-Core 4 300's OrcaSlicer 2.4.2 profile (300 x 300 x 300 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the RatRig V-Minion's own OrcaSlicer profile. Copy it to the printer's storage (memory card or USB drive) or upload it through the printer's web interface or app, where the model has one.
21 models: V-Cast, V-Core 3 200, V-Core 3 300, V-Core 3 400, V-Core 3 500, V-Core 4 300, V-Core 4 400, V-Core 4 500, V-Core 4 HYBRID 300, V-Core 4 HYBRID 400, V-Core 4 HYBRID 500, V-Core 4 IDEX 300, V-Core 4 IDEX 300 COPY MODE, V-Core 4 IDEX 300 MIRROR MODE, V-Core 4 IDEX 400, V-Core 4 IDEX 400 COPY MODE, V-Core 4 IDEX 400 MIRROR MODE, V-Core 4 IDEX 500, V-Core 4 IDEX 500 COPY MODE, V-Core 4 IDEX 500 MIRROR MODE and V-Minion.
The RatRig V-Core 3 500: 500 x 500 x 500 mm in its OrcaSlicer profile. The smallest is the RatRig V-Minion, 180 x 180 x 180 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
Nozzles of 0.4 mm (21 models), 0.5 mm (15 models), 0.6 mm (16 models) and 0.8 mm (12 models). The print presets go from 0.08 to 0.35 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.
Other printer brands
Creality 41Volumic 21Anycubic 20Snapmaker 19Elegoo 18Wanhao France 17Geeetech 16Prusa 13Sovol 13Bambu Lab 12Flashforge 12Qidi 11Artillery 10Z-Bolt 9Voron 8SeeMeCNC 7FLSun 6re3D 6CoLiDo 5Generic profiles 5MagicMaker 5FlyingBear 4InfiMech 4Kingroon 4Lulzbot 4Tiertime 4Anker 3BIQU 3Blocks 3Cubicon 3DeltaMaker 3Dremel 3Eryone 3Folgertech 3WonderMaker 3Comgrow 2CONSTRUCT3D 2innovatiQ 2LH 2LONGER 2Raise3D 2RolohaunDesign 2SecKit 2TwoTrees 2Vivedino 2Vzbot 2WEMAKE3D 2
Read more
Online slicerWhat the online slicer does, the settings it has and what it costs.Every printerAll the printers the slicer has a profile for, by brand.STL to G-codeWhat the conversion does, and the settings that matter.From a phone to the slicerGetting the file from Files or Downloads onto the printer.