Online slicer for Flashforge printers
Upload an STL or 3MF, pick your Flashforge printer among 12 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.Flashforge in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 12 |
| Nozzle sizes | 0.25, 0.3, 0.4, 0.6 and 0.8 mm |
| Largest printable area | 300 x 330 x 600 mm (Flashforge Guider 3 Ultra) |
| Smallest printable area | 150 x 150 x 150 mm (Flashforge Adventurer 3 Series) |
| Layer heights in the print presets | 0.06 to 0.56 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled Flashforge presets |
Getting the file to a Flashforge printer
The Adventurer 5M series and the AD5X take a .gcode file from a USB drive or over the local network from Flashforge's own software. Older Flashforge models, such as the Adventurer 3 and 4, were built around FlashPrint and its own file format: check that yours starts a plain .gcode before relying on it.Every Flashforge printer in the slicer (12)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF. Linked models have a page of their own.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| Flashforge AD5X | 0.25, 0.4, 0.6 and 0.8 mm | 220 x 220 x 220 mm | 0.1 to 0.56 mm | .gcode |
| Flashforge Adventurer 3 Series | 0.4 and 0.6 mm | 150 x 150 x 150 mm | 0.2 to 0.3 mm | .gcode |
| Flashforge Adventurer 4 Series | 0.3, 0.4 and 0.6 mm | 220 x 200 x 250 mm | 0.13 to 0.3 mm | .gcode |
| Flashforge Adventurer 5M | 0.25, 0.4, 0.6 and 0.8 mm | 220 x 220 x 220 mm | 0.06 to 0.56 mm | .gcode |
| Flashforge Adventurer 5M Pro | 0.25, 0.4, 0.6 and 0.8 mm | 220 x 220 x 220 mm | 0.06 to 0.56 mm | .gcode |
| Flashforge Artemis | 0.4 mm | 190 x 195 x 200 mm | 0.18 to 0.18 mm | .gcode |
| Flashforge Creator 5 | 0.4, 0.6 and 0.8 mm | 256 x 256 x 256 mm | 0.12 to 0.48 mm | .gcode |
| Flashforge Creator 5 Pro | 0.4, 0.6 and 0.8 mm | 256 x 256 x 256 mm | 0.12 to 0.48 mm | .gcode |
| Flashforge Guider 2s | 0.4 mm | 280 x 250 x 300 mm | 0.12 to 0.3 mm | .gcode |
| Flashforge Guider 3 Ultra | 0.4, 0.6 and 0.8 mm | 300 x 330 x 600 mm | 0.12 to 0.42 mm | .gcode |
| Flashforge Guider4 | 0.25, 0.4, 0.6 and 0.8 mm | 300 x 300 x 300 mm or 300 x 300 x 301 mm | 0.1 to 0.48 mm | .gcode |
| Flashforge Guider4 Pro | 0.25, 0.4, 0.6 and 0.8 mm | 300 x 300 x 300 mm or 300 x 300 x 301 mm | 0.1 to 0.48 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the Flashforge Adventurer 5M and its nozzle (0.25, 0.4, 0.6 and 0.8 mm), choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the Flashforge Adventurer 5M's OrcaSlicer 2.4.2 profile (220 x 220 x 220 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the Flashforge AD5X's own OrcaSlicer profile. Copy it to the printer's storage (memory card or USB drive) or upload it through the printer's web interface or app, where the model has one.
12 models: AD5X, Adventurer 3 Series, Adventurer 4 Series, Adventurer 5M, Adventurer 5M Pro, Artemis, Creator 5, Creator 5 Pro, Guider 2s, Guider 3 Ultra, Guider4 and Guider4 Pro. Flashforge Adventurer 5M has a page of its own with the bed size, layer heights and prompts sized for it.
The Flashforge Guider 3 Ultra: 300 x 330 x 600 mm in its OrcaSlicer profile. The smallest is the Flashforge Adventurer 3 Series, 150 x 150 x 150 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
Nozzles of 0.25 mm (5 models), 0.3 mm (1 model), 0.4 mm (12 models), 0.6 mm (10 models) and 0.8 mm (8 models). The print presets go from 0.06 to 0.56 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.