Online slicer for Raise3D printers
Upload an STL or 3MF, pick your Raise3D printer among 2 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.Raise3D in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 2 |
| Nozzle sizes | 0.4 mm |
| Largest printable area | 340 x 300 x 605 mm (Raise3D Pro3 Plus) |
| Smallest printable area | 340 x 300 x 300 mm (Raise3D Pro3) |
| Layer heights in the print presets | 0.1 to 0.25 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled Raise3D presets |
Every Raise3D printer in the slicer (2)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| Raise3D Pro3 | 0.4 mm | 340 x 300 x 300 mm | 0.1 to 0.25 mm | .gcode |
| Raise3D Pro3 Plus | 0.4 mm | 340 x 300 x 605 mm | 0.1 to 0.25 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the Raise3D Pro3, choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the Raise3D Pro3's OrcaSlicer 2.4.2 profile (340 x 300 x 300 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the Raise3D Pro3 Plus's own OrcaSlicer profile. Copy it to the printer's SD card or USB drive, or upload it through the printer's web interface or print server, if it has one.
2 models: Pro3 and Pro3 Plus.
The Raise3D Pro3 Plus: 340 x 300 x 605 mm in its OrcaSlicer profile. The smallest is the Raise3D Pro3, 340 x 300 x 300 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
A 0.4 mm nozzle on every model. The print presets go from 0.1 to 0.25 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.