Online slicer for Artillery printers
Upload an STL or 3MF, pick your Artillery printer among 10 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.Artillery in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 10 |
| Nozzle sizes | 0.2, 0.4, 0.6 and 0.8 mm |
| Largest printable area | 300 x 310 x 400 mm (Artillery Sidewinder X4 Plus) |
| Smallest printable area | 220 x 220 x 250 mm (Artillery Genius Pro) |
| Layer heights in the print presets | 0.06 to 0.56 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled Artillery presets |
Getting the file to an Artillery printer
Artillery's Sidewinder X1, X2 and Genius families run Marlin-based firmware and print from a memory card or USB drive. The Sidewinder X4 models run Klipper and also take uploads through a web interface on the local network.Every Artillery printer in the slicer (10)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| Artillery Genius | 0.4 mm | 220 x 220 x 250 mm | 0.15 to 0.25 mm | .gcode |
| Artillery Genius Pro | 0.4 mm | 220 x 220 x 250 mm | 0.15 to 0.25 mm | .gcode |
| Artillery Hornet | 0.4 mm | 230 x 230 x 250 mm | 0.16 to 0.24 mm | .gcode |
| Artillery M1 Pro | 0.2, 0.4, 0.6 and 0.8 mm | 265 x 283 x 260 mm or 260 x 260 x 260 mm | 0.06 to 0.56 mm | .gcode |
| Artillery Sidewinder X1 | 0.4 mm | 300 x 300 x 400 mm | 0.16 to 0.24 mm | .gcode |
| Artillery Sidewinder X2 | 0.4 mm | 300 x 300 x 400 mm | 0.2 to 0.2 mm | .gcode |
| Artillery Sidewinder X3 Plus | 0.4 mm | 300 x 305 x 400 mm | 0.2 to 0.2 mm | .gcode |
| Artillery Sidewinder X3 Pro | 0.4 mm | 240 x 245 x 260 mm | 0.2 to 0.2 mm | .gcode |
| Artillery Sidewinder X4 Plus | 0.4 mm | 300 x 310 x 400 mm | 0.08 to 0.28 mm | .gcode |
| Artillery Sidewinder X4 Pro | 0.4 mm | 240 x 250 x 260 mm | 0.08 to 0.28 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the Artillery Sidewinder X4 Plus, choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the Artillery Sidewinder X4 Plus's OrcaSlicer 2.4.2 profile (300 x 310 x 400 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the Artillery Sidewinder X2's own OrcaSlicer profile. Copy it to the printer's storage (memory card or USB drive) or upload it through the printer's web interface or app, where the model has one.
10 models: Genius, Genius Pro, Hornet, M1 Pro, Sidewinder X1, Sidewinder X2, Sidewinder X3 Plus, Sidewinder X3 Pro, Sidewinder X4 Plus and Sidewinder X4 Pro.
The Artillery Sidewinder X4 Plus: 300 x 310 x 400 mm in its OrcaSlicer profile. The smallest is the Artillery Genius Pro, 220 x 220 x 250 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
Nozzles of 0.2 mm (1 model), 0.4 mm (10 models), 0.6 mm (1 model) and 0.8 mm (1 model). The print presets go from 0.06 to 0.56 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.