Online slicer for InfiMech printers
Upload an STL or 3MF, pick your InfiMech printer among 4 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.InfiMech in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 4 |
| Nozzle sizes | 0.4 mm |
| Largest printable area | 250 x 250 x 205 mm (InfiMech EX) |
| Smallest printable area | 220 x 220 x 250 mm (InfiMech TX Hardened Steel Nozzle) |
| Layer heights in the print presets | 0.08 to 0.24 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled InfiMech presets |
Every InfiMech printer in the slicer (4)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| InfiMech EX | 0.4 mm | 250 x 250 x 205 mm | 0.08 to 0.24 mm | .gcode |
| InfiMech EX+APS | 0.4 mm | 250 x 250 x 167 mm | 0.08 to 0.24 mm | .gcode |
| InfiMech TX | 0.4 mm | 220 x 220 x 250 mm | 0.08 to 0.24 mm | .gcode |
| InfiMech TX Hardened Steel Nozzle | 0.4 mm | 220 x 220 x 250 mm | 0.08 to 0.24 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the InfiMech EX, choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the InfiMech EX's OrcaSlicer 2.4.2 profile (250 x 250 x 205 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the InfiMech EX+APS's own OrcaSlicer profile. Copy it to the printer's SD card or USB drive, or upload it through the printer's web interface or print server, if it has one.
4 models: EX, EX+APS, TX and TX Hardened Steel Nozzle.
The InfiMech EX: 250 x 250 x 205 mm in its OrcaSlicer profile. The smallest is the InfiMech TX Hardened Steel Nozzle, 220 x 220 x 250 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
A 0.4 mm nozzle on every model. The print presets go from 0.08 to 0.24 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.