Online slicer · generic profiles
Online slicer with generic Klipper, Marlin and RepRap profiles
No profile for your printer? Upload an STL or 3MF and slice it in the browser with one of OrcaSlicer's 5 generic profiles, then download a .gcode file. Nothing to install.The catalog has 5 generic profiles from OrcaSlicer 2.4.2: Generic Klipper Printer, Generic Marlin Printer, Generic Repetier Printer, Generic RRF Printer and Generic ToolChanger Printer. Nozzle profiles go from 0.2 to 0.8 mm (0.2, 0.4, 0.6 and 0.8 mm); all 5 profiles have a 0.4 mm one. The largest printable area in the profiles is 350 x 350 x 300 mm, on the Generic ToolChanger Printer; the smallest is 250 x 250 x 250 mm, on the Generic RRF Printer. The print presets cover layer heights from 0.08 to 0.56 mm. Every one slices to a plain .gcode file.The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.
The generic profiles at a glance
| Setting | Value |
|---|---|
| Profiles | 5 |
| Nozzle sizes | 0.2, 0.4, 0.6 and 0.8 mm |
| Largest printable area | 350 x 350 x 300 mm (Generic ToolChanger Printer) |
| Smallest printable area | 250 x 250 x 250 mm (Generic RRF Printer) |
| Layer heights in the print presets | 0.08 to 0.56 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled generic presets |
When to use a generic profile
These are OrcaSlicer's starting-point profiles for a printer it has no vendor profile for: a self-built machine, a heavily modified one, or a brand that is not in the catalog. Pick the one for your firmware: Klipper (the file then goes up through Mainsail or Fluidd), Marlin (SD card, USB or OctoPrint), RepRapFirmware (Duet Web Control) or Repetier, and the tool-changer profile for a multi-tool Klipper machine. The bed size and start and end G-code are OrcaSlicer's generic defaults, not your machine's: check that the part fits the volume below and that the start G-code suits your printer before the first print. If your printer's brand has a profile of its own, use that instead.The 5 generic profiles
Printable area, nozzle variants and layer heights come from each profile's OrcaSlicer profile. Where a profile has variants with different beds, each one is listed. Every profile has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Profile | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| Generic Klipper Printer | 0.2, 0.4, 0.6 and 0.8 mm | 250 x 250 x 250 mm | 0.08 to 0.56 mm | .gcode |
| Generic Marlin Printer | 0.4 mm | 250 x 250 x 250 mm | 0.08 to 0.28 mm | .gcode |
| Generic Repetier Printer | 0.4 mm | 250 x 250 x 250 mm | 0.2 to 0.2 mm | .gcode |
| Generic RRF Printer | 0.4 mm | 250 x 250 x 250 mm | 0.08 to 0.28 mm | .gcode |
| Generic ToolChanger Printer | 0.2, 0.4, 0.6 and 0.8 mm | 350 x 350 x 300 mm | 0.08 to 0.56 mm | .gcode |
Generic Klipper PrinterNozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 250 x 250 x 250 mmLayer heights: 0.08 to 0.56 mm · .gcode
Generic Marlin PrinterNozzles: 0.4 mmPrintable area: 250 x 250 x 250 mmLayer heights: 0.08 to 0.28 mm · .gcode
Generic Repetier PrinterNozzles: 0.4 mmPrintable area: 250 x 250 x 250 mmLayer heights: 0.2 to 0.2 mm · .gcode
Generic RRF PrinterNozzles: 0.4 mmPrintable area: 250 x 250 x 250 mmLayer heights: 0.08 to 0.28 mm · .gcode
Generic ToolChanger PrinterNozzles: 0.2, 0.4, 0.6 and 0.8 mmPrintable area: 350 x 350 x 300 mmLayer heights: 0.08 to 0.56 mm · .gcode
Questions
Yes, with a generic profile: pick the one for your firmware (Klipper, Marlin, Repetier, RRF, ToolChanger), upload an STL or 3MF of up to 50 MB and download a .gcode file. The bed size (350 x 350 x 300 mm at most) and start G-code are OrcaSlicer's defaults, so check they suit your machine. 1 free slice with a free account, no card.
5 profiles: Generic Klipper Printer, Generic Marlin Printer, Generic Repetier Printer, Generic RRF Printer and Generic ToolChanger Printer.
Nozzles of 0.2 mm (2 profiles), 0.4 mm (5 profiles), 0.6 mm (2 profiles) and 0.8 mm (2 profiles). The print presets go from 0.08 to 0.56 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.
Other printer brands
Creality 41RatRig 21Volumic 21Anycubic 20Snapmaker 19Elegoo 18Wanhao France 17Geeetech 16Prusa 13Sovol 13Bambu Lab 12Flashforge 12Qidi 11Artillery 10Z-Bolt 9Voron 8SeeMeCNC 7FLSun 6re3D 6CoLiDo 5MagicMaker 5FlyingBear 4InfiMech 4Kingroon 4Lulzbot 4Tiertime 4Anker 3BIQU 3Blocks 3Cubicon 3DeltaMaker 3Dremel 3Eryone 3Folgertech 3WonderMaker 3Comgrow 2CONSTRUCT3D 2innovatiQ 2LH 2LONGER 2Raise3D 2RolohaunDesign 2SecKit 2TwoTrees 2Vivedino 2Vzbot 2WEMAKE3D 2
Read more
Online slicerWhat the online slicer does, the settings it has and what it costs.Every printerAll the printers the slicer has a profile for, by brand.STL to G-codeWhat the conversion does, and the settings that matter.From a phone to the slicerGetting the file from Files or Downloads onto the printer.