Online slicer for FlyingBear printers
Upload an STL or 3MF, pick your FlyingBear printer among 4 models and its nozzle, choose the layer height, filament, infill and supports, and download a .gcode file with the print time and filament weight. Sliced by OrcaSlicer 2.4.2 with the printer's own profile, in the browser, nothing to install.FlyingBear in the slicer at a glance
| Setting | Value |
|---|---|
| Printer models | 4 |
| Nozzle sizes | 0.4 mm |
| Largest printable area | 300 x 300 x 350 mm (FlyingBear Reborn3) |
| Smallest printable area | 220 x 220 x 250 mm (FlyingBear S1) |
| Layer heights in the print presets | 0.08 to 0.24 mm |
| Filament presets | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF |
| File you download | .gcode |
| Slicer | OrcaSlicer 2.4.2 with its bundled FlyingBear presets |
Every FlyingBear printer in the slicer (4)
Printable area, nozzle variants and layer heights come from each model's OrcaSlicer profile. Where a model has variants with different beds, each one is listed. Every model has filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.| Model | Nozzles | Printable area | Layer heights | File |
|---|---|---|---|---|
| FlyingBear Ghost 6 | 0.4 mm | 255 x 210 x 210 mm | 0.12 to 0.24 mm | .gcode |
| FlyingBear Ghost7 | 0.4 mm | 250 x 250 x 205 mm | 0.08 to 0.24 mm | .gcode |
| FlyingBear Reborn3 | 0.4 mm | 300 x 300 x 350 mm | 0.08 to 0.24 mm | .gcode |
| FlyingBear S1 | 0.4 mm | 220 x 220 x 250 mm | 0.08 to 0.24 mm | .gcode |
Questions
Yes. Upload an STL or 3MF of up to 50 MB to SpeakCAD's online slicer, pick the FlyingBear Ghost 6, choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the FlyingBear Ghost 6's OrcaSlicer 2.4.2 profile (255 x 210 x 210 mm), in the browser on a computer, a Chromebook, an iPad or a phone. 1 free slice with a free account, no card.
A plain .gcode file, sliced with the FlyingBear Ghost7's own OrcaSlicer profile. Copy it to the printer's SD card or USB drive, or upload it through the printer's web interface or print server, if it has one.
4 models: Ghost 6, Ghost7, Reborn3 and S1.
The FlyingBear Reborn3: 300 x 300 x 350 mm in its OrcaSlicer profile. The smallest is the FlyingBear S1, 220 x 220 x 250 mm. The online slicer warns when an uploaded model does not fit the bed of the printer you picked.
A 0.4 mm nozzle on every model. The print presets go from 0.08 to 0.24 mm layers, depending on the nozzle. Filament presets: PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF.
The online slicer gives every account 1 free slice, its first (a free account, no card). After that, a slice uses one slice from a Slicer pack (20 slices for $3, once, never expire) or 5 credits, and slicing is included in Pro and Unlimited. Re-slicing the same file with other settings within 10 minutes is free.