1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Samsung Galaxy S25 Ultra desk stand
This is not a fixed STL. SpeakCAD generates the samsung galaxy s25 ultra desk stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a samsung galaxy s25 ultra desk stand is
A stand that holds a Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) at 55 degrees with a 14 mm USB-C slot and a 7.2 mm S Pen well. The phone well is 81 × 11 mm with 0.4 mm clearance. The base is 120 × 85 mm. Print in PLA with 2 mm walls.
The S Pen desk dock in the library is a different angle; this one is for charging. Tell SpeakCAD case thickness, preview the stand in the browser at no cost, then download the STL.
Example prompt
Design an S25 Ultra desk stand 120×85×70 mm, 81×11 mm well at 55 degrees, 14 mm USB-C slot, 7.2 mm S Pen well, 2 mm walls.
People also search
s25 ultra stand stlgalaxy s25 ultra charging stand 3d prints25 ultra desk docksamsung s25 ultra holder 3d model
Questions people ask about a samsung galaxy s25 ultra desk stand
A stand that holds a Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) at 55 degrees with a 14 mm USB-C slot and a 7.2 mm S Pen well. The phone well is 81 × 11 mm with 0.4 mm clearance. The base is 120 × 85 mm. Print in PLA with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an S25 Ultra desk stand 120×85×70 mm, 81×11 mm well at 55 degrees, 14 mm USB-C slot, 7.2 mm S Pen well, 2 mm walls.
The S Pen desk dock in the library is a different angle; this one is for charging. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Logitech MX Keys S angled trayA 6 degree tray that parks an MX Keys S (about 440 × 130 × 20 mm) so the front edge matches an MX Master.Pen cup with sloped compartmentsA desk pen holder divided into three angled compartments so pens, markers and scissors each lean forward and stay easy to grab.Elgato Wave 3 microphone desk riser with cable slotA riser that lifts the Elgato Wave:3 closer to mouth height without a boom arm.Logitech MX Master 4 charging-puck standA stand that holds a Logitech MX Master 4 (about 126 × 84 × 51 mm) on its USB-C or wireless puck at 10 degrees so the thumb rest stays up.HackRF One PortaPack H2M standA stand that holds a HackRF + PortaPack H2M at 30 degrees with a 14 mm USB slot.iPad Pro 11-inch M4 Pencil charging standA stand that holds an 11-inch iPad Pro M4 (about 250 × 177 × 5.3 mm) at 60 degrees for StandBy and parks an Apple Pencil Pro on a 9 mm MagSafe saddle.