1
Enclosures & cases
RAK WisBlock 19007 Meshtastic enclosure
This is not a fixed STL. SpeakCAD generates the rak wisblock 19007 meshtastic enclosure to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a RAK19007 Meshtastic enclosure, 62×36×22 mm cavity, 50×34×6 mm LiPo pocket, USB-C slot, 6.5 mm SMA hole, 2 mm reset hole, 2 mm walls.
What a rak wisblock 19007 meshtastic enclosure is
An enclosure for a RAK19007 WisBlock base board (60 × 30 mm) with an RAK4631 core, plus a 50 × 34 × 6 mm LiPo. The cavity is 62 × 36 × 22 mm with a 9.5 × 3.8 mm USB-C opening, a 6.5 mm SMA bulkhead hole, a 2 mm reset hole and a 1 mm roof over an optional GPS module. Walls are 2 mm. Print upside down in PETG or ASA.
The larger RAK19003 mini base and RAK5005-O base are different sizes. Open the ready-made model in SpeakCAD for free, adjust the battery pocket in the viewer or the chat, then download the STL.
People also search
rak19007 case stlrak wisblock meshtastic enclosurerak4631 case 3d printwisblock meshtastic case 3d model
Questions people ask about a rak wisblock 19007 meshtastic enclosure
An enclosure for a RAK19007 WisBlock base board (60 × 30 mm) with an RAK4631 core, plus a 50 × 34 × 6 mm LiPo. The cavity is 62 × 36 × 22 mm with a 9.5 × 3.8 mm USB-C opening, a 6.5 mm SMA bulkhead hole, a 2 mm reset hole and a 1 mm roof over an optional GPS module. Walls are 2 mm. Print upside down in PETG or ASA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a RAK19007 Meshtastic enclosure, 62×36×22 mm cavity, 50×34×6 mm LiPo pocket, USB-C slot, 6.5 mm SMA hole, 2 mm reset hole, 2 mm walls.
The larger RAK19003 mini base and RAK5005-O base are different sizes. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Vented case for a Raspberry Pi 4A two-part shell for the Raspberry Pi 4 that protects the board while keeping it cool, with cut-outs for USB, Ethernet, HDMI, audio, USB-C power and the micr…AirTag luggage tag holder with screw-closed caseA luggage tag that hides an Apple AirTag (31.9 mm diameter, 8 mm thick) inside a screw-closed case so it cannot be prised out in transit, with a loop for a c…Raspberry Pi Camera Module 3 case with tripod threadA compact housing for the Raspberry Pi Camera Module 3, which uses a 25 x 24 mm board with 2.2 mm holes on a 21 x 12.5 mm pattern.Flipper Zero Wi-Fi devboard caseA slim case that covers a Flipper Wi-Fi devboard GPIO without blocking the SMA, snap fit, 1.2 mm PETG.Raspberry Pi CM5 IO Board caseA case for the Raspberry Pi Compute Module 5 IO Board (160 × 90 mm) with a CM5 and cooler fitted.4-channel relay module DIN rail caseA DIN rail case for a 4-channel 5 V relay module (about 75 × 55 mm).