1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Prusa MK4S print-sheet wall rack
This is not a fixed STL. SpeakCAD generates the prusa mk4s print-sheet wall rack to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a prusa mk4s print-sheet wall rack is
A rack that hangs three MK4S 250 × 210 mm sheets on a wall so they are not stacked on the printer. Each slot is 4 mm with 0.3 mm clearance. The plate is 220 × 40 × 30 mm with two 4.5 mm holes. Print in PETG with 2 mm walls.
The MK4S nozzle caddy is a different part. In SpeakCAD you set three vs five sheets, preview the rack in the browser at no cost, then download the STL.
Example prompt
Design an MK4S sheet wall rack 220×40×30 mm, three 4 mm slots, two 4.5 mm holes, 2 mm PETG.
People also search
mk4s sheet rack stlprusa mk4s plate holder 3d printmk4s build plate wallprusa sheet rack 3d model
Questions people ask about a prusa mk4s print-sheet wall rack
A rack that hangs three MK4S 250 × 210 mm sheets on a wall so they are not stacked on the printer. Each slot is 4 mm with 0.3 mm clearance. The plate is 220 × 40 × 30 mm with two 4.5 mm holes. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an MK4S sheet wall rack 220×40×30 mm, three 4 mm slots, two 4.5 mm holes, 2 mm PETG.
The MK4S nozzle caddy is a different part. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Plane-blade sharpening jig 50 mmA 50 mm honing jig that holds a plane iron at 25 or 30 degrees with a 4 mm clamp bar.Dyson V15 Detect Absolute bin-empty standA stand that holds a V15 Detect Absolute over a bin at 40 degrees so the cyclone empties without a dust cloud in your face.Bambu Lab P1S AMS desiccant boxA box that sits in a P1S AMS slot and holds 50 g of desiccant with a 0.4 mm vent grid so the official bag is not the only dryer.Shelf pin drilling template, 32 mm systemAdjustable shelving needs columns of 5 mm holes at precise 32 mm spacing, and this template makes that reliable with a hand drill.Dremel 4000 plunge router base with depth stopA small router base that threads onto the nose of a Dremel 4000, 3000 or 8220 so the tool can cut inlays, dados and hinge recesses with a 3.2 mm shank bit.Creality K1C poop deflector binA deflector that sends K1C purge off the right side into a 100 × 60 × 45 mm bin instead of onto the bed heater wires.