1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Makita 40V XGT battery wall mount
This is not a fixed STL. SpeakCAD generates the makita 40v xgt battery wall mount to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a makita 40v xgt battery wall mount is
A mount that hangs four 40V XGT batteries (about 90 × 80 mm) on a stud so they are not mixed with 18V LXT packs. Each nest is 92 × 82 mm. The rail is 340 × 70 × 22 mm. Print in PETG with 2.4 mm walls.
The 18V LXT battery holder is too small. Tell SpeakCAD four vs six, preview the mount in the browser for free, then download the STL.
Example prompt
Create a 40V XGT battery wall mount 340×70×22 mm, four 92×82 mm nests, 2.4 mm PETG.
People also search
makita 40v battery mount stlxgt battery wall holder 3d printmakita xgt rack40v xgt battery dock 3d model
Questions people ask about a makita 40v xgt battery wall mount
A mount that hangs four 40V XGT batteries (about 90 × 80 mm) on a stud so they are not mixed with 18V LXT packs. Each nest is 92 × 82 mm. The rail is 340 × 70 × 22 mm. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a 40V XGT battery wall mount 340×70×22 mm, four 92×82 mm nests, 2.4 mm PETG.
The 18V LXT battery holder is too small. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Kärcher K4 pressure washer nozzle holder wall bracketA wall bracket that parks the Vario Power lance, Dirt Blaster nozzle and foam cannon of a Kärcher K4 or K5 pressure washer so they stop rolling around the ga…reMarkable Paper Pro wall dock with Marker slotA wall dock that holds a reMarkable Paper Pro (about 274 × 197 × 5.1 mm) and parks the Marker Plus in a 12 mm bore 140 mm deep.Dyson HP09 remote wall clipA clip that hangs the HP09 Formaldehyde remote next to a light switch so it is not the curved thing on the floor.Makita DHS680 track-adapter hookA hook that hangs a DHS680 circular saw on a French cleat or 4.5 mm hole pair by the track-adapter shoe.Pole mount bracket for a 40 mm mastA two-piece clamp that grips a 40 mm round mast and offers a flat face with screw holes for a small antenna or outdoor Wi-Fi unit.Peloton Bike phone and tablet holder trayA tray that clamps to the horizontal section of the Peloton Bike or Bike+ handlebar and holds a phone or small tablet beside the main screen, handy for readi…