1
Brackets & mounts
Nikon Z6 III Arca-Swiss plate
This is not a fixed STL. SpeakCAD generates the nikon z6 iii arca-swiss plate to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an Arca-Swiss plate for a Nikon Z6 III, 38×75×10 mm, 38 mm dovetail with 45° edges, 1/4-20 slot, 2 mm grip lip, strap lug hole at one end.
What a nikon z6 iii arca-swiss plate is
An Arca-Swiss plate for the Nikon Z6 III (138.5 × 101.5 × 74 mm). The plate is 38 × 75 × 10 mm with the 38 mm dovetail, a 1/4-20 slot, a 2 mm lip against the front of the grip and a strap lug hole at one end. The battery door stays reachable. Print flat in PETG or ASA at 100% infill.
The Nikon Z f is wider and much flatter (144 × 103.2 × 49 mm) with no deep grip, so the lip will not seat. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
nikon z6 iii arca swiss plate stlz6iii quick release plate 3d printnikon z6 3 arca platez6 iii tripod plate
Questions people ask about a nikon z6 iii arca-swiss plate
An Arca-Swiss plate for the Nikon Z6 III (138.5 × 101.5 × 74 mm). The plate is 38 × 75 × 10 mm with the 38 mm dovetail, a 1/4-20 slot, a 2 mm lip against the front of the grip and a strap lug hole at one end. The battery door stays reachable. Print flat in PETG or ASA at 100% infill.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an Arca-Swiss plate for a Nikon Z6 III, 38×75×10 mm, 38 mm dovetail with 45° edges, 1/4-20 slot, 2 mm grip lip, strap lug hole at one end.
The Nikon Z f is wider and much flatter (144 × 103.2 × 49 mm) with no deep grip, so the lip will not seat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Hatch Rest sound machine wall shelf with cable channelA small shelf that mounts a Hatch Rest or Rest+ sound machine on the nursery wall out of reach of a toddler while keeping the top touch ring accessible.Dyson V12 Detect Slim tool clipA clip that snaps a V12 Detect Slim crevice or combination tool onto the wand so it travels with the vacuum.M5Stack Atom Lite Bluetooth proxy wall mountA plug-side wall mount for an M5Stack Atom Lite (24 × 24 × 10 mm) running as an ESPHome Bluetooth proxy, so it sits mid-room on a USB charger instead of behi…Car headrest post bag hook for 12 to 14 mm postsA clip-on hook for the steel headrest posts found in most cars, which are 12 to 14 mm in diameter.Blue Yeti shock mount with 5/8 threadA shock mount for a Blue Yeti that screws into the 5/8-27 thread in the bottom of the microphone once it is off its desk stand.Garmin Varia radar mount for aero seatpostThe rubber band mount supplied with the Garmin Varia RTL515 and RCT715 is designed for round posts and sits crooked on the D-shaped aero seatposts found on C…