1
Brackets & mounts
iPad mini car headrest mount for back seat
A rear-seat holder for the iPad mini (195.4 x 134.8 x 6.3 mm) that clamps to the two headrest posts so children can watch films in landscape. Two post clamps close around 12 to 14 mm posts with M4 bolts and slide along a slotted bar to suit post spacing from 120 to 190 mm, while the cradle pocket is 197 x 137 x 9 mm to accept a thin case, with a 14 x 9 mm cable notch at the bottom. The cradle tilts 10 degrees, walls are 3 mm and everything prints flat. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| headrest post diameter | 13 mm |
| clamp wall thickness | 3 mm |
| clamp height (along post axis) | 18 mm |
| gap width for closing clamp | 4 mm |
| M4 clearance hole | 4.4 mm |
| M4 head/nut recess diameter | 8 mm |
| recess depth for nut | 3.5 mm |
| bar cross-section width | 12 mm |
| bar cross-section height | 8 mm |
| slot width for M4 bolt sliding | 4.4 mm |
| general wall thickness | 3 mm |
| iPad pocket width | 197 mm |
| iPad pocket height | 137 mm |
| iPad pocket depth | 9 mm |
Example prompt
Design a headrest tablet mount for an iPad mini with two clamps for 13 mm posts closed by M4 bolts, a slotted bar allowing 120 to 190 mm post spacing, a cradle with a 197 x 137 x 9 mm pocket tilted 10 degrees, a 14 x 9 mm cable notch and 3 mm walls.
Fit notes
Headrest post spacing is different in nearly every car, which is why fixed downloaded mounts never line up. In SpeakCAD you give your post diameter and spacing along with the tablet and case, preview the mount in the browser, refine the tilt in the chat, then download the STL.
Questions people ask about an iPad mini car headrest mount for back seat
A rear-seat holder for the iPad mini (195.4 x 134.8 x 6.3 mm) that clamps to the two headrest posts so children can watch films in landscape. Two post clamps close around 12 to 14 mm posts with M4 bolts and slide along a slotted bar to suit post spacing from 120 to 190 mm, while the cradle pocket is 197 x 137 x 9 mm to accept a thin case, with a 14 x 9 mm cable notch at the bottom. The cradle tilts 10 degrees, walls are 3 mm and everything prints flat.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More brackets & mounts
Wall mount for 18 V power tool batteriesReady-made, opens free. A wall rail that spare 18 V slide-on battery packs click onto, so they stop rolling around a drawer and are visible when you need one.Brompton handlebar mount for Garmin Edge computersReady-made, opens free. Brompton M and S bars have a 22.2 mm grip section and very little real estate once the brake levers and shifter are on, so a normal out-front mount does not…TP-Link Tapo C200 camera ceiling mount plateReady-made, opens free. An inverted mount plate for the TP-Link Tapo C200 pan and tilt camera, which is 86.6 x 85 x 117.7 mm and screws to a base with two holes about 50 mm apart.Chuckit ball launcher wall mount with ball holderReady-made, opens free. A garage or hallway mount that holds a Chuckit Classic 26M launcher upright by its handle and keeps two tennis balls ready beside it.Ring Battery Doorbell Pro 45-degree wedgeReady-made, opens free. A 45-degree wedge that aims a Ring Battery Doorbell Pro (about 128 × 62 × 28 mm) down a driveway instead of at the street.Dyson V8 Absolute wand wall holsterReady-made, opens free. A wall holster that parks a V8 Absolute wand and three click-in tools so you are not buying Dyson's official dock.