Chuckit ball launcher wall mount with ball holder
A garage or hallway mount that holds a Chuckit Classic 26M launcher upright by its handle and keeps two tennis balls ready beside it. The launcher handle is an oval about 32 by 22 mm, so the clip is a 34 by 24 mm C-shape with 2 mm walls that flexes open, and a 66 mm cup sits above it to cradle the launcher claw. Two 68 mm rings hold standard 65 mm balls. A 180 by 60 mm back plate with two 5 mm screw holes takes the whole assembly, printed flat on the plate face with the clip opening upward. PETG handles the flexing and cold garage air better than PLA.
Handle sizes differ between the Classic, Sport and Pro launchers, and your ball count varies, so a generated mount fits your kit exactly. In SpeakCAD you describe the launcher and how many balls, preview the mount in the browser at no cost, add a leash hook in the chat and download the STL.
Design a wall mount with a 180 x 60 mm back plate 4 mm thick with two 5 mm screw holes, a 34 x 24 mm oval C-clip with 2 mm walls for a Chuckit launcher handle, a 66 mm cup 20 mm tall above it and two 68 mm rings 15 mm tall for 65 mm tennis balls.