1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
MacBook Pro 14 M4 vertical clamshell dock
This is not a fixed STL. SpeakCAD generates the macbook pro 14 m4 vertical clamshell dock to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a macbook pro 14 m4 vertical clamshell dock is
A vertical clamshell dock for a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) with an 17 × 314 mm slot, a 22 mm MagSafe cutout on the right, and a 150 × 100 mm base. Side vents 12 mm wide keep the hinge exhaust open. Print in two PETG halves with 2.4 mm walls so a 1.6 kg Pro does not rock.
The 16-inch vertical stand is too wide and the Air dock is too thin. In SpeakCAD you add case thickness, preview the dock in the browser at no cost, then download the STL.
Example prompt
Design a MacBook Pro 14 M4 vertical dock: 17×314 mm slot, 22 mm MagSafe cutout, 150×100 mm base, 12 mm side vents, two PETG halves, 2.4 mm walls.
People also search
macbook pro 14 vertical dock stlmacbook pro 14 m4 clamshell stand 3d print14 inch macbook pro vertical standm4 pro 14 dock 3d model
Questions people ask about a macbook pro 14 m4 vertical clamshell dock
A vertical clamshell dock for a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) with an 17 × 314 mm slot, a 22 mm MagSafe cutout on the right, and a 150 × 100 mm base. Side vents 12 mm wide keep the hinge exhaust open. Print in two PETG halves with 2.4 mm walls so a 1.6 kg Pro does not rock.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a MacBook Pro 14 M4 vertical dock: 17×314 mm slot, 22 mm MagSafe cutout, 150×100 mm base, 12 mm side vents, two PETG halves, 2.4 mm walls.
The 16-inch vertical stand is too wide and the Air dock is too thin. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Logitech MX Ergo S trackball wedgeA 20 degree wedge under an MX Ergo S (about 138 × 100 × 50 mm) so the thumb ball sits higher than the stock 0–20 click.Two-piece tablet stand with adjustable angleA cradle and a folding prop that together hold a tablet at 30, 45 or 60 degrees.Anker 737 power bank desk cradle with cable channelA cradle that keeps the Anker 737 Power Bank (PowerCore 24K) standing upright on a desk with its charge cable plugged in and its display readable.IKEA LACK 60 mm square cable grommetA square grommet that drops into a 60 mm LACK hole and presents a 20 mm brush opening plus a 8 mm USB-C notch.MacBook Air 15-inch M4 clamshell standA clamshell stand for a 15-inch MacBook Air M4 (about 11.5 mm closed, 340 mm wide) that lifts the hinge 20 mm so air can exit and a USB-C hub can sit underne…Mac mini M4 rear cable combA comb that clips onto the rear edge of a Mac mini M4 and separates HDMI, two Thunderbolt cables and power so they do not unplug when you slide the mini.