1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Logitech MX Mechanical palm rest
This is not a fixed STL. SpeakCAD generates the logitech mx mechanical palm rest to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a logitech mx mechanical palm rest is
A 18 mm palm rest that matches an MX Mechanical (about 430 × 150 mm) with a 8 mm front radius and four 3 mm rubber-foot recesses. The rest is 430 × 80 × 18 mm. Print as two PLA halves so it fits a 220 mm bed.
A Keychron rest is the wrong width. Tell SpeakCAD Mechanical vs Mechanical Mini, preview the rest in the browser without paying, then download the STL.
Example prompt
Model an MX Mechanical palm rest 430×80×18 mm in two halves, 8 mm front radius, four 3 mm foot recesses, 2 mm walls.
People also search
mx mechanical palm rest stllogitech mx mechanical wrist rest 3d printmx mechanical restlogitech mechanical palm 3d model
Questions people ask about a logitech mx mechanical palm rest
A 18 mm palm rest that matches an MX Mechanical (about 430 × 150 mm) with a 8 mm front radius and four 3 mm rubber-foot recesses. The rest is 430 × 80 × 18 mm. Print as two PLA halves so it fits a 220 mm bed.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an MX Mechanical palm rest 430×80×18 mm in two halves, 8 mm front radius, four 3 mm foot recesses, 2 mm walls.
A Keychron rest is the wrong width. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
IKEA LACK 60 mm square cable grommetA square grommet that drops into a 60 mm LACK hole and presents a 20 mm brush opening plus a 8 mm USB-C notch.MacBook Air 15-inch M4 clamshell standA clamshell stand for a 15-inch MacBook Air M4 (about 11.5 mm closed, 340 mm wide) that lifts the hinge 20 mm so air can exit and a USB-C hub can sit underne…MacBook Pro 14 M4 vertical clamshell dockA vertical clamshell dock for a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) with an 17 × 314 mm slot, a 22 mm MagSafe cutout on the right, and…Logitech MX Keys S angled trayA 6 degree tray that parks an MX Keys S (about 440 × 130 × 20 mm) so the front edge matches an MX Master.Pen cup with sloped compartmentsA desk pen holder divided into three angled compartments so pens, markers and scissors each lean forward and stay easy to grab.Elgato Wave 3 microphone desk riser with cable slotA riser that lifts the Elgato Wave:3 closer to mouth height without a boom arm.