1
Desk & office
iPad Air 11 inch drawing stand with Apple Pencil tray
A low-angle drawing stand for the iPad Air 11 (247.6 x 178.5 x 6.1 mm) that props the tablet at 20 degrees like a drafting board, with a groove along the front for an Apple Pencil Pro or 2nd generation (166 mm long, 8.9 mm across). The 12 mm ledge holds the bottom edge with 0.5 mm clearance for a bare tablet, the 9.5 mm Pencil groove runs 170 mm along the ledge, and the 260 x 120 mm base has 3 mm walls with cutouts to save filament. It prints flat, face up. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| base width (X) | 260 mm |
| base depth (Y) | 120 mm |
| base thickness | 6 mm |
| shell wall thickness | 3 mm |
| ledge height | 12 mm |
| slot width in ledge | 7 mm |
| slot length (front-back) | 60 mm |
| groove length along front | 170 mm |
Example prompt
Model a drawing stand for an iPad Air 11 with a 260 x 120 mm base, a 20 degree support face 150 mm deep, a 12 mm ledge with a 7 mm wide slot, a 9.5 mm half-round Apple Pencil groove 170 mm long along the front, 3 mm walls and weight-saving cutouts.
Fit notes
Drawing needs a shallow, stable angle that folding stands cannot hold and a Pencil rest that most downloads forget. In SpeakCAD you give your iPad size, case thickness and preferred angle, preview the stand in the browser, refine the Pencil groove in the chat, then download the STL.
Questions people ask about an iPad Air 11 inch drawing stand with Apple Pencil tray
A low-angle drawing stand for the iPad Air 11 (247.6 x 178.5 x 6.1 mm) that props the tablet at 20 degrees like a drafting board, with a groove along the front for an Apple Pencil Pro or 2nd generation (166 mm long, 8.9 mm across). The 12 mm ledge holds the bottom edge with 0.5 mm clearance for a bare tablet, the 9.5 mm Pencil groove runs 170 mm along the ledge, and the 260 x 120 mm base has 3 mm walls with cutouts to save filament. It prints flat, face up.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Garmin Fenix and Forerunner charging cable dock standReady-made, opens free. A desk dock that holds the Garmin four-pin charging plug pointing upward, so a Fenix 7 (47 mm case) or Forerunner 265 (46.1 mm case) drops onto the connector…Apple Watch Ultra 3 nightstand charger dockReady-made, opens free. A nightstand dock that holds an Apple Watch Ultra 3 (about 49 mm case, 12 mm thick) on its magnetic charger at 15 degrees, with a 80 × 20 mm trough behind fo…Sonos Move 2 charging-cradle riserReady-made, opens free. A 20 mm riser under a Move 2 cradle so the speaker clears a deep windowsill lip.HackRF One PortaPack H2M standReady-made, opens free. A stand that holds a HackRF + PortaPack H2M at 30 degrees with a 14 mm USB slot.MacBook Pro 14 M4 HDMI hub under-standReady-made, opens free. A 22 mm shelf that sits under a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) and parks a 6-port HDMI/SD hub so the left Thunderbolt ports stay…Vertical laptop stand for closed-lid dockingReady-made, opens free. A weighted-look holder that stores a closed laptop on its edge beside a monitor.