1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
IKEA LACK TV-unit cord comb
This is not a fixed STL. SpeakCAD generates the ikea lack tv-unit cord comb to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea lack tv-unit cord comb is
A comb that sits on the back rail of a LACK TV unit (145 cm) and separates HDMI, power and optical so they do not knot behind the stand. The body is 180 × 20 × 16 mm with five 8 mm saddles and two 4.5 mm holes. Print in PETG with 1.6 mm walls.
The square grommet is a hole cover. In SpeakCAD you set cable count, preview the comb in the browser without paying, then download the STL.
Example prompt
Model a LACK TV cord comb 180×20×16 mm, five 8 mm saddles, two 4.5 mm holes, 1.6 mm PETG.
People also search
lack tv cable comb stlikea lack tv cord organizer 3d printlack tv unit tidylack hdmi comb 3d model
Questions people ask about a ikea lack tv-unit cord comb
A comb that sits on the back rail of a LACK TV unit (145 cm) and separates HDMI, power and optical so they do not knot behind the stand. The body is 180 × 20 × 16 mm with five 8 mm saddles and two 4.5 mm holes. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a LACK TV cord comb 180×20×16 mm, five 8 mm saddles, two 4.5 mm holes, 1.6 mm PETG.
The square grommet is a hole cover. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
MacBook Air 15 M4 MagSafe right-side clipA clip that hangs from the right edge of a 15-inch MacBook Air M4 and holds the MagSafe 3 cable at chassis height so the tip does not scratch the aluminium.Keychron Q6 Max cable combA comb that parks a Q6 Max USB-C cable plus two USB-A dongles along a 15–32 mm desk edge.Keycap storage tray with stem postsA tray for sorting and storing loose MX-style keycaps on a grid of cross-shaped posts that hold each cap upright and prevent scuffing.Novation Launchpad X angled desk standAn angled stand that tilts a Novation Launchpad X, Launchpad Mini MK3 or Launchpad Pro MK3 towards you at 20 degrees so the RGB pad grid is readable standing…Sonos Move 2 charging-cradle riserA 20 mm riser under a Move 2 cradle so the speaker clears a deep windowsill lip.MacBook Pro 14 M4 SD-reader under-stand shelfA 20 mm shelf that sits under a 14-inch MacBook Pro stand and holds an SD card reader plus two CFexpress cards in labelled wells.