1
Organizers & storage
Forstner bit organizer, 15 to 35 mm
This is not a fixed STL. SpeakCAD generates the forstner bit organizer, 15 to 35 mm to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Forstner bit tray, 200×50×20 mm, round pockets 16, 21, 26, 31 and 36 mm, 12 mm deep, 10.5 mm shank holes, embossed sizes.
What a forstner bit organizer, 15 to 35 mm is
A tray for a five-piece Forstner set (15, 20, 25, 30 and 35 mm) that holds each bit cutter-down in a round pocket 1 mm larger than the head, with a 10.5 mm shank hole in the floor so the centre spur never touches plastic. Pockets are 12 mm deep and the tray is 200 × 50 × 20 mm with embossed sizes. Print it flat in PLA or PETG.
Large 50 mm Forstner bits often have 13 mm shanks; add a separate pocket. Open the organizer in SpeakCAD for free, change the sizes in the chat or the viewer, then download the STL.
People also search
forstner bit holderforstner bit organizer stlforstner bit storage 3d printforstner bit case
Questions people ask about a forstner bit organizer, 15 to 35 mm
A tray for a five-piece Forstner set (15, 20, 25, 30 and 35 mm) that holds each bit cutter-down in a round pocket 1 mm larger than the head, with a 10.5 mm shank hole in the floor so the centre spur never touches plastic. Pockets are 12 mm deep and the tray is 200 × 50 × 20 mm with embossed sizes. Print it flat in PLA or PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Forstner bit tray, 200×50×20 mm, round pockets 16, 21, 26, 31 and 36 mm, 12 mm deep, 10.5 mm shank holes, embossed sizes.
Large 50 mm Forstner bits often have 13 mm shanks; add a separate pocket. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Apple Watch band organizer drawer insert with lug railsA drawer insert with a row of rails that copy the Apple Watch case slot, so Sport, Solo Loop and Braided bands for 42, 44, 45, 46 and 49 mm watches slide on…Tupperware and Pyrex lid organizer rack for the cabinetA tiered rack that stores plastic and glass container lids on edge so Tupperware, Pyrex, Rubbermaid and Sistema lids stop avalanching out of the cabinet.Grease-gun coupler wall holderA wall hook that parks a grease-gun coupler and a spare Zerk cap, 20 mm saddle and a 8 mm cap well.Milwaukee Packout Low-Profile Organizer dividersA set of dividers that split a Packout Low-Profile Organizer (about 380 × 250 mm) into six 120 × 80 mm wells for fittings.Nintendo Switch game case shelf holder for 10 casesA shelf holder for ten Nintendo Switch or Switch 2 retail cases (170 × 105 × 11 mm) standing spine-out like books.French cleat screwdriver rack, 12 slotsA 12-slot French cleat screwdriver rack in two rows.