1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
DeWalt 20V Atomic compact holster
This is not a fixed STL. SpeakCAD generates the dewalt 20v atomic compact holster to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dewalt 20v atomic compact holster is
A holster that parks a 20V Atomic compact drill or impact (about 160 mm) on a 4.5 mm hole pair. The well is 70 × 45 × 55 mm with a 18 mm trigger cutout. Print in PETG with 2.4 mm walls.
The 20V MAX battery rack does not hold the tool. In SpeakCAD you pick drill vs impact, preview the holster in the browser without paying, then download the STL.
Example prompt
Model a 20V Atomic holster 70×45×55 mm, 18 mm trigger cutout, two 4.5 mm holes, 2.4 mm PETG.
People also search
dewalt atomic holster stl20v atomic wall holder 3d printdewalt compact drill dockatomic impact holster 3d model
Questions people ask about a dewalt 20v atomic compact holster
A holster that parks a 20V Atomic compact drill or impact (about 160 mm) on a 4.5 mm hole pair. The well is 70 × 45 × 55 mm with a 18 mm trigger cutout. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a 20V Atomic holster 70×45×55 mm, 18 mm trigger cutout, two 4.5 mm holes, 2.4 mm PETG.
The 20V MAX battery rack does not hold the tool. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Ceiling mount ring for a round access pointA ring-shaped mounting plate for disc-style wireless access points that ship without a suitable ceiling bracket, or whose original plate was lost.Garmin Varia radar mount for aero seatpostThe rubber band mount supplied with the Garmin Varia RTL515 and RCT715 is designed for round posts and sits crooked on the D-shaped aero seatposts found on C…Wyze Cam v3 corner wall mount with rain hoodA corner bracket for the Wyze Cam v3, a 51 x 53 x 58 mm camera with a 1/4 inch-20 thread in its base.Valve Index headset and controller wall mountA combined wall station for the Valve Index headset and its two Knuckles controllers.Hatch Restore 2 wall shelf with cable slotA 160 mm shelf that holds a Restore 2 and drops the USB-C through a 8 mm slot so the nightstand stays clear.IKEA EKET cabinet anti-tip bracketA bracket that ties an EKET cube (35 × 35 cm) to the wall so a stacked tower cannot tip.