1
Brackets & mounts
Elegoo Neptune 4 Pro LED bar mount
This is not a fixed STL. SpeakCAD generates the elegoo neptune 4 pro led bar mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an LED bar mount for a Neptune 4 Pro 2040 beam, M5 T-nut hole, 12×8 mm channel for 10 mm LED strip, tilted 25 degrees.
What a elegoo neptune 4 pro led bar mount is
Mounts that fix an LED light bar under the top 2040 beam of a Neptune 4 Pro, lighting the 225 × 225 mm bed for the camera. Each mount uses one M5 T-nut, holds a 12 × 8 mm channel for a 10 mm wide LED strip and tilts it 25 degrees forward, and the light runs off the 24 V supply. Print in PETG or ASA on its side.
The Neptune 4 Max is much wider, so the channel between mounts needs to be longer. Open the ready-made mounts in SpeakCAD for free, change the angle in the viewer or the chat, then download the STL.
People also search
neptune 4 pro led bar stlneptune 4 led mountneptune 4 pro light barneptune 4 pro led 3d print
Questions people ask about a elegoo neptune 4 pro led bar mount
Mounts that fix an LED light bar under the top 2040 beam of a Neptune 4 Pro, lighting the 225 × 225 mm bed for the camera. Each mount uses one M5 T-nut, holds a 12 × 8 mm channel for a 10 mm wide LED strip and tilts it 25 degrees forward, and the light runs off the 24 V supply. Print in PETG or ASA on its side.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an LED bar mount for a Neptune 4 Pro 2040 beam, M5 T-nut hole, 12×8 mm channel for 10 mm LED strip, tilted 25 degrees.
The Neptune 4 Max is much wider, so the channel between mounts needs to be longer. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Prusa MK4S frame webcam mountAn arm that clamps to the top of the MK4S frame, about 6 mm thick, and holds a webcam with a 1/4-20 screw, for timelapses or remote monitoring through PrusaC…GoPro bike saddle rail mountA saddle rail clamp with a GoPro mount facing backward, for filming the road behind or mounting a rear light that uses GoPro prongs.Wall holder for a laptop power brickA cradle that holds a power supply brick against the wall or under a shelf, keeping it off the carpet where it collects dust and overheats.Philips Hue motion sensor corner mount bracketA wedge that lets the Philips Hue motion sensor sit in the corner of a room, where its field of view covers the whole space.AirPods Max 2 wall hook with braided cable slotA wall hook that holds AirPods Max 2 (about 188 × 168 × 83 mm) by the headband with a 20 mm padded saddle and a 8 × 40 mm slot underneath for the braided USB…IKEA KALLAX 2×2 anti-tip bracketA bracket that ties a 2×2 KALLAX (77 × 77 cm) to the wall through the existing back-panel holes.