1
Desk & office
Cardo Packtalk Edge desk charging stand
This is not a fixed STL. SpeakCAD generates the cardo packtalk edge desk charging stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Cardo Packtalk Edge charging stand, 92×24 mm cradle, 20 mm walls, 10×5 mm USB-C slot, 70×60 mm base with rubber feet recesses.
What a cardo packtalk edge desk charging stand is
A desk stand that holds a Cardo Packtalk Edge intercom unit (about 90 × 45 × 22 mm) on its side while it charges, so it is ready on the helmet shelf. The cradle is 92 × 24 mm with 1 mm clearance and 20 mm walls, a 10 × 5 mm slot routes a USB-C cable to the port, and the 70 × 60 mm base has a 4 mm bottom recess for rubber feet. Print upright in PLA or PETG.
The Packtalk Neo and Sena 50S are shaped differently, so measure the unit and tell the chat. Open the ready-made stand in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
cardo packtalk edge standcardo charging dock stlmotorcycle intercom stand 3d printpacktalk edge holder
Questions people ask about a cardo packtalk edge desk charging stand
A desk stand that holds a Cardo Packtalk Edge intercom unit (about 90 × 45 × 22 mm) on its side while it charges, so it is ready on the helmet shelf. The cradle is 92 × 24 mm with 1 mm clearance and 20 mm walls, a 10 × 5 mm slot routes a USB-C cable to the port, and the 70 × 60 mm base has a 4 mm bottom recess for rubber feet. Print upright in PLA or PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Cardo Packtalk Edge charging stand, 92×24 mm cradle, 20 mm walls, 10×5 mm USB-C slot, 70×60 mm base with rubber feet recesses.
The Packtalk Neo and Sena 50S are shaped differently, so measure the unit and tell the chat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Studio Display VESA cable channelA channel that hides power and Thunderbolt behind a Studio Display on the official VESA mount so the cables follow the arm instead of hanging.Keychron Q2 HE wrist restA 20 mm wrist rest that matches a Keychron Q2 HE (about 360 × 150 mm) with two 8 × 2 mm magnet pockets for the case's front magnets.DJI Mic 2 transmitter desk standA desk stand for a DJI Mic 2 transmitter (30.5 × 38.5 × 19.5 mm) so it works as a tabletop mic in front of your laptop.Garmin Fenix and Forerunner charging cable dock standA desk dock that holds the Garmin four-pin charging plug pointing upward, so a Fenix 7 (47 mm case) or Forerunner 265 (46.1 mm case) drops onto the connector…Framework Laptop 13 vertical dockA vertical dock that holds a Framework Laptop 13 (about 16 mm thick closed, 297 mm wide) on its side so the expansion cards stay accessible.Raspberry Pi 500+ vertical standA vertical stand that holds a Pi 500+ on its side so the ports stay clear, 18 × 290 mm slot.