1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Bambu Lab H2D AMS HT spool rest
This is not a fixed STL. SpeakCAD generates the bambu lab h2d ams ht spool rest to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bambu lab h2d ams ht spool rest is
A rest that parks an AMS HT spool (about 200 mm) beside an H2D so a fifth material is not on the floor. The saddle is 80 mm and the base is 120 × 80 mm. Print in PETG with 2.4 mm walls.
The H2D build-plate wall rack is for sheets. In SpeakCAD you add a PTFE guide, preview the rest in the browser without paying, then download the STL.
Example prompt
Model an H2D AMS HT spool rest 120×80×50 mm, 80 mm saddle, 2.4 mm PETG.
People also search
h2d ams ht rest stlbambu h2d spool holder 3d printams ht spool standh2d extra spool rest 3d model
Questions people ask about a bambu lab h2d ams ht spool rest
A rest that parks an AMS HT spool (about 200 mm) beside an H2D so a fifth material is not on the floor. The saddle is 80 mm and the base is 120 × 80 mm. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an H2D AMS HT spool rest 120×80×50 mm, 80 mm saddle, 2.4 mm PETG.
The H2D build-plate wall rack is for sheets. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Presta valve core remover tool keychainA tiny keychain tool that unscrews the removable core from a Presta valve on Stan's, Muc-Off or Peaty's tubeless valves so you can inject sealant or clear a…Bambu Lab P1S poop-chute extension binAn extension that carries P1S purge poop 80 mm further forward into a 90 × 70 × 50 mm bin so it does not pile against the door.Oscillating-tool depth-stop collarA collar that clamps on a 10 mm oscillating-tool neck and presents a 40 mm fence so plunge cuts stop at a set depth.SRAM Level bleed blockA block that holds SRAM Level pistons in during a bleed, 24 × 12 × 8 mm.Festool Systainer3 SYS-MIDI bit insertAn insert that holds 50 bits and a Centrotec chuck in a SYS-MIDI so they replace the foam.Soldering helping hands baseA weighted base with sockets for flexible gooseneck arms keeps small boards and wires positioned while you solder.