1
Hobby & gaming
Xbox wireless controller wall rack for four
This is not a fixed STL. SpeakCAD generates the xbox wireless controller wall rack for four to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a wall rack for four Xbox controllers, 680×40×5 mm plate, four 36 mm arms 52 mm deep with 6 mm lips, 165 mm apart, 4 mm holes.
What a xbox wireless controller wall rack for four is
A wall rack for four Xbox Wireless Controllers (153 × 61 × 102 mm) that holds each pad on a 36 mm wide arm, 52 mm deep, with a 6 mm lip at the tip, arms 165 mm apart on a 680 × 40 × 5 mm back plate. The arms slide into dovetails, and the plate has five 4 mm countersunk holes. Print the arms flat in PETG.
The Elite Series 2 is a little heavier, so print its arm at 60 % infill. Open the rack in SpeakCAD for free, adjust the arm count in the viewer or the chat, then download the STL.
People also search
xbox controller wall mount stlxbox controller wall rack 3d printxbox controller wall holderxbox series controller hanger
Questions people ask about a xbox wireless controller wall rack for four
A wall rack for four Xbox Wireless Controllers (153 × 61 × 102 mm) that holds each pad on a 36 mm wide arm, 52 mm deep, with a 6 mm lip at the tip, arms 165 mm apart on a 680 × 40 × 5 mm back plate. The arms slide into dovetails, and the plate has five 4 mm countersunk holes. Print the arms flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a wall rack for four Xbox controllers, 680×40×5 mm plate, four 36 mm arms 52 mm deep with 6 mm lips, 165 mm apart, 4 mm holes.
The Elite Series 2 is a little heavier, so print its arm at 60 % infill. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Guitar pick holder with headstock clipPicks vanish constantly, and a holder that clips onto the headstock keeps four within reach mid-song.Gunpla HG action base adapter with 3 mm pegA small saddle that lets High Grade Gunpla kits without a dedicated stand hole sit on a Bandai Action Base 4 or 5 arm.Squishmallow display shelf 20 cmA 200 mm shelf with a 25 mm lip that keeps a medium Squishmallow from rolling off.Pedaltrain Nano Plus power-supply mountA mount that hangs a 9 V brick under a Nano Plus with two 6 mm zip-tie slots matching the rail.MSI Claw 8 AI+ desk standA desk stand for the MSI Claw 8 AI+ (299.5 × 126.2 mm, 24.2 mm at the body and deeper at the grips) that holds it at 60 degrees on a 42 mm deep ledge.Pedalboard patch bay jack plateA patch bay for the edge of a pedalboard so you plug the guitar and amp into the board instead of the first and last pedal.