Hobby & gaming

8BitDo Ultimate controller charging dock riser

A riser that tilts the 8BitDo Ultimate Bluetooth or Ultimate 2C charging dock back 15 degrees and lifts it 40 mm off the desk so the controller stands proud of a keyboard and the dock's USB-C cable tucks away. The recess is sized to the dock's footprint (roughly 100 x 68 mm, measure yours) with 0.4 mm clearance and a 1.5 mm lip that keeps it from sliding forward, and a 10 mm slot at the rear guides the cable. The part prints in a single piece on its back face with 2 mm walls, a 3 mm base, and four shallow 10 mm recesses for rubber feet.

Instead of hunting for a riser that matches your exact dock revision, you type the footprint into SpeakCAD, preview it in the browser at no cost, ask for a second dock bay or a game cartridge tray in the same chat, and download the STL when it fits.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Model a charging dock riser for an 8BitDo Ultimate controller dock: a 100 x 68 mm recess with 0.4 mm clearance and 1.5 mm retaining lip, tilted 15 degrees and raised 40 mm, a 10 mm rear cable slot, 2 mm walls, 3 mm base and four 10 mm rubber foot recesses.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More hobby & gaming

Hexagonal dice vault with lidA dice vault stores a full seven-piece polyhedral set in a compact hex body with a friction-fit or threaded lid.Game controller stand for two padsA controller stand keeps two gamepads upright on a shelf instead of sliding around in a drawer, and it stops the analogue sticks getting crushed.Guitar pick holder with headstock clipPicks vanish constantly, and a holder that clips onto the headstock keeps four within reach mid-song.Wall-mounted SD card and battery holderCamera batteries and SD cards pile up fast, and a wall-mounted holder keeps charged batteries and empty cards separate from used ones.ASUS ROG Ally charging stand with angled cradleAn angled cradle for the ASUS ROG Ally and ROG Ally X (280 x 111 x 21 mm at the body, up to 32 mm at the grips) that keeps the handheld upright on a desk whi…Gunpla HG action base adapter with 3 mm pegA small saddle that lets High Grade Gunpla kits without a dedicated stand hole sit on a Bandai Action Base 4 or 5 arm.

Make your 8bitdo ultimate controller charging dock riser now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.