Hobby & gaming

Guitar pick holder with headstock clip

Picks vanish constantly, and a holder that clips onto the headstock keeps four within reach mid-song. The holder has a sprung C-clip sized for a 15 to 20 mm headstock thickness, a 5 mm thick body, and four pick slots 30 mm wide by 1.2 mm deep angled at 20 degrees so picks stay in but pull out easily. A felt or TPU pad on the clip contact surfaces protects the finish, and PETG resists the creep of a permanently sprung clamp.

Headstock thicknesses vary between instruments, so a holder generated by SpeakCAD to your measurement fits without cracking the clip or sliding around. Change the number of slots or ask for a bass-sized version in the chat, and preview it free before you download.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a guitar pick holder with a C-clip opening 17 mm and 25 mm deep with 1.5 mm rounded contact pads, a 5 mm thick body 40 mm tall, and four pick slots 30 mm wide, 1.2 mm thick, 15 mm deep, angled 20 degrees back.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More hobby & gaming

PS5 DualSense dual controller charging standA twin-bay stand for two PlayStation 5 DualSense or DualSense Edge controllers (160 x 66 x 106 mm) that holds them face-out with their USB-C ports aligned ov…Gunpla HG action base adapter with 3 mm pegA small saddle that lets High Grade Gunpla kits without a dedicated stand hole sit on a Bandai Action Base 4 or 5 arm.Funko Pop shelf riser three tier for boxed figuresA stepped riser that lifts the back rows of boxed Funko Pop figures so all three rows are visible on a normal bookshelf.Round miniature bases with slotSlotted round bases hold metal or resin miniatures with a tab underneath, and buying them in odd sizes gets expensive.Desk clamp headset hangerA headset hanger clamps to the edge of a desk and holds a gaming headset off the surface where it would otherwise gather cables and crumbs.Cold shoe mount adapter for cameraA cold shoe adapter lets you bolt a microphone, light or monitor onto a camera cage or tripod that only offers a 1/4 inch thread.

Make your guitar pick holder with headstock clip now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.