1
Hobby & gaming
ASUS ROG Ally charging stand with angled cradle
An angled cradle for the ASUS ROG Ally and ROG Ally X (280 x 111 x 21 mm at the body, up to 32 mm at the grips) that keeps the handheld upright on a desk while its 65 W charger stays connected. The Ally's USB-C and ROG XG Mobile ports sit on the top edge, so the stand has a 25 mm cable channel routed down the back, a 285 mm wide seat with 0.5 mm clearance, and a 12 degree lean that leaves the rear intake vents open. The 2 mm walls and a 160 mm deep base stop it tipping when you tap the screen. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| ROG Ally X width | 285 mm |
| fit clearance | 0.5 mm |
| device thickness held by seat | 33 mm |
| wall thickness | 2 mm |
| base width (x) | 300 mm |
| base depth (y) | 160 mm |
| base plate thickness | 4 mm |
| front lip height | 10 mm |
| back panel height | 140 mm |
| cable channel width | 25 mm |
| rubber foot recess diameter | 12 mm |
| rubber foot recess depth | 2 mm |
| gap from base front edge to seat front wall | 10 mm |
Example prompt
Model a charging stand for an ASUS ROG Ally X: a 285 mm wide cradle 33 mm deep with 0.5 mm clearance, 12 degree lean, 25 mm cable channel down the back for a top-edge USB-C lead, open vents behind the seat, 2 mm walls and a 160 x 300 mm base with rubber foot recesses.
Fit notes
Every handheld is slightly different, and a stand for the LCD Ally can pinch the thicker Ally X. In SpeakCAD you type the exact body thickness you measured, preview the cradle in the browser, ask for a shallower lean or a second bay for the controller in the chat, and download the STL.
Questions people ask about an ASUS ROG Ally charging stand with angled cradle
An angled cradle for the ASUS ROG Ally and ROG Ally X (280 x 111 x 21 mm at the body, up to 32 mm at the grips) that keeps the handheld upright on a desk while its 65 W charger stays connected. The Ally's USB-C and ROG XG Mobile ports sit on the top edge, so the stand has a 25 mm cable channel routed down the back, a 285 mm wide seat with 0.5 mm clearance, and a 12 degree lean that leaves the rear intake vents open. The 2 mm walls and a 160 mm deep base stop it tipping when you tap the screen.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More hobby & gaming
LEGO minifigure display shelf for 24 figuresReady-made, opens free. A stepped, wall-hanging shelf with four tiers of six LEGO minifigures each, every figure standing on a pair of real 4.8 mm studs at the 8 mm LEGO pitch so it…Steam Deck 2 travel kickstand with case lipReady-made, opens free. A clip-on kickstand for a Steam Deck 2 (about 300 × 120 × 50 mm) that still clips over a Jsaux or dbrand case.DJI Mini 5 Pro prop holderReady-made, opens free. A holder that clips Mini 5 Pro props in pairs so they do not bend in a bag, 80 × 20 × 12 mm.GameSir G8 Galileo phone-stopReady-made, opens free. A pair of stops that keep a 70–85 mm phone from sliding out of a G8 Galileo, 2 mm TPU lips.Modular board game insert binsReady-made, opens free. Insert bins fill a game box so components stay sorted and set-up drops from ten minutes to two.Guitar wall hanger with padded yokeReady-made, opens free. A wall hanger lifts a guitar off the floor and out of the way of feet and vacuum cleaners.