LEGO minifigure display shelf for 24 figures
A stepped, wall-hanging shelf with four tiers of six LEGO minifigures each, every figure standing on a pair of real 4.8 mm studs at the 8 mm LEGO pitch so it clicks on and cannot topple. Tiers are 18 mm deep and rise 45 mm apart, leaving clear headroom for a 40 mm minifigure with a hat or hair piece, and each row is set back 8 mm so the ones behind are fully visible. The shelf prints face-up in one piece with 2 mm walls and 1.7 mm tall studs, and two keyhole slots on the back take standard 4 mm screws.
Generic shelves either skip the studs or get the pitch wrong so figures fall off. In SpeakCAD you set the number of figures per row and the number of rows, preview the shelf in the browser at no cost, ask for wider spacing for Series figures with accessories in the chat, and download the STL.
Create a LEGO minifigure display shelf 210 x 80 x 180 mm with four stepped tiers 18 mm deep spaced 45 mm vertically and set back 8 mm each, six stud pairs per tier at 8 mm pitch with 4.8 mm diameter 1.7 mm tall studs, 2 mm walls and two rear keyhole slots for 4 mm screws.