1
Hobby & gaming
Steam Deck 2 travel kickstand with case lip
A clip-on kickstand for a Steam Deck 2 (about 300 × 120 × 50 mm) that still clips over a Jsaux or dbrand case. The clip is 110 mm wide with 1.5 mm lips and 0.4 mm extra clearance, the 55 mm leg folds to 60 degrees on a 6 mm friction hinge, and a 12 mm cutout clears the rear vents. Print clip and leg in PETG as two parts. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| length of clip along device edge | 110 mm |
| per-side clearance to case | 0.4 mm |
| thickness of top/bottom arms | 2.5 mm |
| thickness of back wall | 2.5 mm |
| how far arms reach forward | 8 mm |
| lip protrusion | 1.5 mm |
| length of lip along arm tip | 3 mm |
| vent cutout diameter | 12 mm |
| pin diameter | 6 mm |
| friction clearance for leg bore | 0.3 mm |
| pin/boss/leg width | 14 mm |
| where hinge boss starts along clip length | 5 mm |
| how far boss/pin sticks out from back wall | 5 mm |
| flat plate thickness | 3 mm |
Example prompt
Design a Steam Deck 2 kickstand: 110 mm clip with 1.5 mm lips and 0.4 mm case clearance, 55 mm leg on a 6 mm friction hinge at 60 degrees, 12 mm vent cutout, two-piece PETG.
Fit notes
OLED kickstands sit short on the Deck 2's thicker battery hump. Tell SpeakCAD which case you use, preview the stand in the browser, then download the STL.
Questions people ask about a Steam Deck 2 travel kickstand with case lip
A clip-on kickstand for a Steam Deck 2 (about 300 × 120 × 50 mm) that still clips over a Jsaux or dbrand case. The clip is 110 mm wide with 1.5 mm lips and 0.4 mm extra clearance, the 55 mm leg folds to 60 degrees on a 6 mm friction hinge, and a 12 mm cutout clears the rear vents. Print clip and leg in PETG as two parts.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More hobby & gaming
MTG Commander deck box for 100 sleeved cardsReady-made, opens free. A hinged deck box sized for a full 100-card Magic: The Gathering Commander deck in double sleeves.Toniebox 2 wall shelf with Tonie pegsReady-made, opens free. A 220 mm shelf that holds a Toniebox 2 and six Tonies on 8 mm pegs.Steam Deck 2 travel-dock cable blockReady-made, opens free. A block that holds a USB-C hub and the Deck 2 charger in a 160 × 80 × 30 mm travel case with 0.4 mm clearance.Dice tower with catch trayReady-made, opens free. A dice tower randomises rolls and keeps dice from flying off the table, which matters when a game night involves drinks and miniatures.RC car shock tower braceReady-made, opens free. A shock tower brace spans the two upper shock mounts and stops the towers flexing or snapping during hard landings.Steam Deck OLED dock stand with USB-C cutoutReady-made, opens free. A desk stand that holds a Steam Deck OLED (298 x 117 x 49 mm) at a 15 degree lean while a USB-C hub or the official dock's cable stays plugged into the top p…