1
Hobby & gaming
Sim racing wheel wall hanger
This is not a fixed STL. SpeakCAD generates the sim racing wheel wall hanger to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a sim racing wheel wall hanger, 80×100 mm plate, 50 mm curved cradle with 15 mm lip, 30 mm quick-release pocket, two 5 mm holes.
What a sim racing wheel wall hanger is
A wall hanger for detached sim racing wheel rims (most GT and round rims are 270 to 320 mm across) that holds the rim on a 50 mm wide curved cradle with a 15 mm lip, plus a 30 mm pocket for the quick-release hub so it does not scrape the wall. The plate is 80 × 100 mm with two 5 mm countersunk holes. Print on its side in PETG, 4 mm walls.
Formula rims are narrow and hang better on two pegs. Open the ready-made hanger in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
sim racing wheel wall mount stlsteering wheel hanger 3d printsim wheel wall holderracing wheel rim wall mount
Questions people ask about a sim racing wheel wall hanger
A wall hanger for detached sim racing wheel rims (most GT and round rims are 270 to 320 mm across) that holds the rim on a 50 mm wide curved cradle with a 15 mm lip, plus a 30 mm pocket for the quick-release hub so it does not scrape the wall. The plate is 80 × 100 mm with two 5 mm countersunk holes. Print on its side in PETG, 4 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a sim racing wheel wall hanger, 80×100 mm plate, 50 mm curved cradle with 15 mm lip, 30 mm quick-release pocket, two 5 mm holes.
Formula rims are narrow and hang better on two pegs. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Toniebox 2 wall shelf with Tonie pegsA 220 mm shelf that holds a Toniebox 2 and six Tonies on 8 mm pegs.Boss RC-5 pedalboard riserA 20 mm riser that lifts an RC-5 so you can hit it behind a row of 55 mm pedals, 75 × 65 mm with 3M-pad recesses.ROG Ally X desk standA desk stand for the ROG Ally X (280.6 × 111.3 × 24.7 to 36.9 mm) that holds it at 60 degrees with a 38 mm deep ledge sized for the thicker Ally X grips.Line 6 HX Stomp pedalboard riserA riser for a Line 6 HX Stomp (about 178 × 127 × 64 mm) so its three footswitches sit above the pedals in front.Game controller stand for two padsA controller stand keeps two gamepads upright on a shelf instead of sliding around in a drawer, and it stops the analogue sticks getting crushed.PS5 DualSense dual controller charging standA twin-bay stand for two PlayStation 5 DualSense or DualSense Edge controllers (160 x 66 x 106 mm) that holds them face-out with their USB-C ports aligned ov…