Guitar wall hanger with padded yoke
A wall hanger lifts a guitar off the floor and out of the way of feet and vacuum cleaners. The yoke arms are 55 mm apart to clear a 50 mm neck at the nut, 60 mm long with a 12 mm inward curl at the tips, and 8 mm thick; the back plate is 60 x 100 mm with two 5 mm countersunk holes for wall screws. Printing the yoke on its back in PETG gives the arms full layer strength, and heat-shrink over the arms protects nitro finishes.
Bass, classical and electric necks all differ, and SpeakCAD sizes the yoke opening to your instrument instead of a one-size guess. Ask for a wider arm gap, a longer stand-off from the wall or a pick shelf in the chat and see it update free in the browser.
Make a guitar wall hanger with a 60 x 100 x 6 mm back plate, two countersunk 5 mm holes at 70 mm spacing, a 40 mm stand-off block, and two yoke arms 8 mm thick, 60 mm long, 55 mm apart with 12 mm inward curls.