1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Hobby & gaming
Meta Quest 3S Elite strap wall dock
This is not a fixed STL. SpeakCAD generates the meta quest 3s elite strap wall dock to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a meta quest 3s elite strap wall dock is
A wall dock that holds a Quest 3S with the Elite battery strap hanging on a 40 mm hook and the headset sitting in a 180 mm wide cradle. Two 4.5 mm holes sit on 80 mm centres, a 25 mm well parks both controllers, and a 14 mm USB-C slot at the cradle bottom lets the official charger stay plugged in. Print the dock on its back in PETG with 2.4 mm walls.
Quest 3 docks leave the 3S's lighter facial interface sliding out. Describe the strap you own in SpeakCAD, preview the dock in the browser for free, then download the STL.
Example prompt
Create a Quest 3S wall dock 200×80×70 mm with a 180 mm cradle, 40 mm Elite-strap hook, 25 mm dual-controller well, 14 mm USB-C slot and two 4.5 mm holes on 80 mm centres.
People also search
quest 3s wall mount stlmeta quest 3s elite strap dock 3d printquest 3s headset hangerquest 3s charging dock 3d model
Questions people ask about a meta quest 3s elite strap wall dock
A wall dock that holds a Quest 3S with the Elite battery strap hanging on a 40 mm hook and the headset sitting in a 180 mm wide cradle. Two 4.5 mm holes sit on 80 mm centres, a 25 mm well parks both controllers, and a 14 mm USB-C slot at the cradle bottom lets the official charger stay plugged in. Print the dock on its back in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Quest 3S wall dock 200×80×70 mm with a 180 mm cradle, 40 mm Elite-strap hook, 25 mm dual-controller well, 14 mm USB-C slot and two 4.5 mm holes on 80 mm centres.
Quest 3 docks leave the 3S's lighter facial interface sliding out. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
PlayStation 5 Pro vertical-stand feetA pair of 80 × 40 × 12 mm feet that widen a PS5 Pro vertical stand so it does not rock on carpet.Pedaltrain Nano Plus power-supply mountA mount that hangs a 9 V brick under a Nano Plus with two 6 mm zip-tie slots matching the rail.Magnetic miniature movement trayA movement tray lets you slide a whole unit of miniatures across the board in one motion.Tripod phone clamp with quarter-inch threadA phone clamp turns any tripod into a video rig, and a printed one can be sized for a phone in a thick case that commercial clamps refuse.8BitDo Ultimate controller charging dock riserA riser that tilts the 8BitDo Ultimate Bluetooth or Ultimate 2C charging dock back 15 degrees and lifts it 40 mm off the desk so the controller stands proud…Kindle Colorsoft one-hand page-turn gripA palm grip that clips onto a Kindle Colorsoft (about 175 × 124 × 8 mm) so you can hold it one-handed and tap the page-turn zone with the thumb.