1
Hobby & gaming
Game controller stand for two pads
A controller stand keeps two gamepads upright on a shelf instead of sliding around in a drawer, and it stops the analogue sticks getting crushed. A stand for standard 155 mm wide pads has two cradles 60 mm apart, each with a curved 40 mm radius saddle that supports the grips, a 100 x 180 mm footprint with a 4 mm base, and rubber feet recesses 10 mm in diameter. Thin 2 mm supports look elegant but need a small fillet at the base to avoid snapping. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| width of each saddle (along Y, i.e. controller length direction) | 80 mm |
| saddle radius | 40 mm |
| depth of grip support walls (along X) | 25 mm |
| thickness of the saddle wall | 4 mm |
| extra height above radius for wall | 5 mm |
| distance from edges | 12 mm |
Example prompt
Design a dual game controller stand with two cradles 60 mm apart, each cradle 80 mm wide with a 40 mm radius saddle and 25 mm deep grip supports, a 180 x 100 x 4 mm base with 3 mm fillets, and four 10 mm rubber-foot recesses.
Fit notes
With SpeakCAD you match the cradle width and depth to your exact controller model, whether it is an Xbox pad or a smaller retro one, and you can add a cable slot or a headset hook in the chat. Preview is before you download.
Questions people ask about a game controller stand for two pads
A controller stand keeps two gamepads upright on a shelf instead of sliding around in a drawer, and it stops the analogue sticks getting crushed. A stand for standard 155 mm wide pads has two cradles 60 mm apart, each with a curved 40 mm radius saddle that supports the grips, a 100 x 180 mm footprint with a 4 mm base, and rubber feet recesses 10 mm in diameter. Thin 2 mm supports look elegant but need a small fillet at the base to avoid snapping.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More hobby & gaming
RC car body post extensionReady-made, opens free. Body post extensions raise an RC car shell to clear larger tyres or a taller chassis, and the stock posts are rarely long enough.Steam Deck OLED clip-on kickstand for tabletop playReady-made, opens free. A removable kickstand that clips over the bottom edge of a Steam Deck LCD or OLED (298 x 117 x 49 mm) and props it at 60 degrees for docked-style play with a…Vallejo 17 ml dropper bottle tiered rackReady-made, opens free. A tiered rack for Vallejo Model Color and Game Color 17 ml dropper bottles, which are 27 mm across and about 65 mm tall, and equally at home with Army Painte…WLED hex-panel stand for six cellsReady-made, opens free. A stand that holds a six-cell WLED hex (about 300 mm across) at 15 degrees with a 20 mm USB-C well in the base.Xbox Elite Series 3 paddle standReady-made, opens free. A stand that holds an Elite Series 3 without flattening the rear paddles, 30 mm clearance and a 14 mm USB-C slot.Apple Vision Pro battery-pack belt clipReady-made, opens free. A clip that parks the Vision Pro battery pack on a 40 mm belt so the cable does not yank the headset, 70 × 40 mm saddle.