1
Enclosures & cases
Waveshare 7.5 inch e-paper photo frame
This is not a fixed STL. SpeakCAD generates the waveshare 7.5 inch e-paper photo frame to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a 7.5 inch e-paper frame 190×130×8 mm, 164×99 mm window, 170.2×111.2 mm panel recess, electronics pocket, 70 mm leg at 15 degrees.
What a waveshare 7.5 inch e-paper photo frame is
A photo frame for the Waveshare 7.5 inch e-Paper panel (170.2 × 111.2 mm, 163.2 × 97.9 mm active area). The front is 190 × 130 × 8 mm with a 164 × 99 mm window, the back pocket holds the driver HAT and an ESP32 or Pi Zero, and a 70 mm leg stands it at 15 degrees. Walls are 1.6 mm. Print the front face-down in PLA.
The 7.3 inch colour panel is a different outline and will rattle in this frame. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
7.5 inch e-paper frame stlwaveshare 7.5 epaper case 3d printe-ink photo frame 3d print7.5 e-paper enclosure 3d model
Questions people ask about a waveshare 7.5 inch e-paper photo frame
A photo frame for the Waveshare 7.5 inch e-Paper panel (170.2 × 111.2 mm, 163.2 × 97.9 mm active area). The front is 190 × 130 × 8 mm with a 164 × 99 mm window, the back pocket holds the driver HAT and an ESP32 or Pi Zero, and a 70 mm leg stands it at 15 degrees. Walls are 1.6 mm. Print the front face-down in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a 7.5 inch e-paper frame 190×130×8 mm, 164×99 mm window, 170.2×111.2 mm panel recess, electronics pocket, 70 mm leg at 15 degrees.
The 7.3 inch colour panel is a different outline and will rattle in this frame. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
SONOFF ZBDongle-E protective case with USB extension slotA wraparound sleeve for the SONOFF ZBDongle-E Zigbee coordinator, which measures about 65 x 23 x 12 mm including its USB-A plug and carries an SMA antenna co…Nintendo Switch 2 dock dust coverA cover that sits on a Switch 2 dock (about 170 × 80 × 60 mm) when the console is undocked so dust is not in the USB-C slot.Orange Pi 5 caseA vented case for an Orange Pi 5 (100 × 62 mm).KY-040 rotary encoder knob boxA small control box for a KY-040 rotary encoder (about 32 × 19 mm board, 6 mm D shaft, M7 bushing).Google Coral USB Accelerator holderA vented holder for a Coral USB Accelerator (65 × 30 × 8 mm) running Frigate object detection, which gets hot under load.AirTag wallet card holder slim credit card sizeA credit-card footprint (85.6 x 54 mm) card that holds an Apple AirTag (31.9 mm diameter, 8 mm thick) in a wallet card slot so the wallet can be found in the…