1
Brackets & mounts
Viofo A229 rear camera rear window wedge
This is not a fixed STL. SpeakCAD generates the viofo a229 rear camera rear window wedge to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Viofo A229 rear camera wedge, 40×25 mm pad face, 25 degree angle, 4 mm cable channel, flat back for VHB tape, ASA.
What a viofo a229 rear camera rear window wedge is
A wedge for the rear camera of a Viofo A229 Duo or A229 Pro 3CH that fixes the view on hatchbacks and SUVs with an almost flat rear window. The face is sized for a rear-camera pad of about 40 × 25 mm, the default angle is 25 degrees, and a 4 mm channel along one side routes the cable. Print flat in ASA, which survives a sun-baked rear window better than PETG.
The interior camera of the 3CH kit mounts differently and does not need this wedge. Open the ready-made wedge in SpeakCAD for free, adjust the angle or any millimetre in the viewer or the chat, then download the STL.
People also search
viofo rear camera wedgea229 rear camera angledashcam rear camera mount stlviofo rear cam spacer 3d print
Questions people ask about a viofo a229 rear camera rear window wedge
A wedge for the rear camera of a Viofo A229 Duo or A229 Pro 3CH that fixes the view on hatchbacks and SUVs with an almost flat rear window. The face is sized for a rear-camera pad of about 40 × 25 mm, the default angle is 25 degrees, and a 4 mm channel along one side routes the cable. Print flat in ASA, which survives a sun-baked rear window better than PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Viofo A229 rear camera wedge, 40×25 mm pad face, 25 degree angle, 4 mm cable channel, flat back for VHB tape, ASA.
The interior camera of the 3CH kit mounts differently and does not need this wedge. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Shimano Di2 junction box holder for 31.8 mm handlebarThe Shimano SM-EW90 Di2 junction A normally hangs under the stem on a rubber band, where it rattles and gets pulled by the bar bag straps.Xbox Series S wall mount bracket verticalA two-piece bracket set that hangs an Xbox Series S (275 x 151 x 63.5 mm, 1.93 kg) vertically on the wall next to the TV with its big round fan facing the room.Dyson V8 Fluffy soft-roller wall hookA hook that hangs the V8 Fluffy soft roller (about 230 mm wide) next to the V8 holster so the roller is not stored on its bristles.MikroTik hAP ac lite wall mountA wall cradle for a MikroTik hAP ac lite (113 × 89 × 28 mm) that holds it on edge with the ports facing down, so cables drop straight to the floor.SP Connect handlebar clamp for 22.2 to 28.6 mm barsA two-piece handlebar clamp for 22.2 mm (7/8 inch), 25.4 mm (1 inch) and 28.6 mm fat motorcycle bars, with a 40 × 40 mm flat top pad drilled so a store-bough…Wall mount bracket for a Wi-Fi routerThis bracket gets a flat router off the floor and onto the wall behind the TV or in a utility closet, keeping cables tidy.