1
Brackets & mounts
Meta Quest 3 controller wall hooks pair
A pair of wall hooks for the Meta Quest 3 and Quest 3S Touch Plus controllers, which have no tracking ring, so a conventional VR hook has nothing to grab. Each hook is a 40 mm wide curved cradle that the controller's grip rests in, tilted 20 degrees so the thumbstick and face buttons never touch the wall, with a 12 mm front lip and a small notch for the wrist strap. The 3 mm back plate takes a single 4 mm countersunk screw or a Command strip pad of 45 x 20 mm, and both hooks print flat on their back with 2 mm walls and no supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| from bottom of plate | 48 mm |
| width of cradle | 40 mm |
| shell wall thickness | 2 mm |
| outer radius of curve | 24 mm |
| front lip height | 12 mm |
| strap notch width | 6 mm |
| how deep notch cuts into cradle wall | 6 mm |
Example prompt
Create a pair of Quest 3 controller wall hooks, each a 40 mm wide curved cradle 35 mm deep tilted 20 degrees with a 12 mm front lip and 6 mm strap notch, on a 50 x 60 x 3 mm back plate with one 4.5 mm countersunk screw hole and a flat adhesive pad, 2 mm walls.
Fit notes
Since Meta changed the controller shape, most downloaded hooks were designed for the Quest 2 ring. In SpeakCAD you describe the grip diameter you measured, preview the hooks in the browser without spending anything, ask for a matching headset hanger in the chat and download the STL.
Questions people ask about a Meta Quest 3 controller wall hooks pair
A pair of wall hooks for the Meta Quest 3 and Quest 3S Touch Plus controllers, which have no tracking ring, so a conventional VR hook has nothing to grab. Each hook is a 40 mm wide curved cradle that the controller's grip rests in, tilted 20 degrees so the thumbstick and face buttons never touch the wall, with a 12 mm front lip and a small notch for the wrist strap. The 3 mm back plate takes a single 4 mm countersunk screw or a Command strip pad of 45 x 20 mm, and both hooks print flat on their back with 2 mm walls and no supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More brackets & mounts
Wall holder for a 10 inch tabletReady-made, opens free. A slim wall dock that turns a tablet into a fixed control panel for a smart home dashboard.iPad 10th gen treadmill console holder clipReady-made, opens free. A cradle that hooks over the top lip of a treadmill or exercise bike console and holds an iPad 10th generation (248.6 x 179.5 x 7 mm) in landscape at a 15 de…Scotty rod holder base adapter for kayak trackReady-made, opens free. A plate that lets a Scotty 241 or 244 round deck mount, and therefore any Scotty rod holder, bolt onto the 25 mm gear track found on Oru Kayak, Perception, O…IKEA Skadis hook for Knipex Cobra and combination pliersReady-made, opens free. A double-prong Skadis hook that hangs a Knipex Cobra 250 or combination pliers by the open jaws so the handles dangle in reach.Xbox Series S wall mount bracket verticalReady-made, opens free. A two-piece bracket set that hangs an Xbox Series S (275 x 151 x 63.5 mm, 1.93 kg) vertically on the wall next to the TV with its big round fan facing the room.Sonos Era 300 wall bracket with cable channelReady-made, opens free. A bracket that holds an Era 300 (about 260 mm wide) 40 mm off the wall with a 10 mm cable channel.