Toyota RAV4 5th gen cup holder phone mount
A phone mount for the front cup holders of a 2019 or later RAV4 that lifts the phone level with the dash screen. The base is about 78 mm across and 50 mm deep with a TPU sleeve, a 14 mm stem rises 130 mm, and the cradle takes phones 70 to 82 mm wide with 12 mm lips and a 14 mm cable gap at the bottom. Print in PETG or ASA, base upright. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.No ready-made model for this part yet
Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.Adjust
Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).Example prompt
Design a RAV4 cup holder phone mount, 78 mm base 50 mm deep with TPU sleeve, 14 mm stem 130 mm tall, cradle for 70-82 mm phones, 14 mm cable gap.
Fit notes
The RAV4 Prime and Hybrid share the console, but the 4th gen RAV4 does not.
Questions people ask about a Toyota RAV4 5th gen cup holder phone mount
A phone mount for the front cup holders of a 2019 or later RAV4 that lifts the phone level with the dash screen. The base is about 78 mm across and 50 mm deep with a TPU sleeve, a 14 mm stem rises 130 mm, and the cradle takes phones 70 to 82 mm wide with 12 mm lips and a 14 mm cable gap at the bottom. Print in PETG or ASA, base upright.
There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.
SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.
A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.