1
Organizers & storage
Nintendo Switch game case shelf holder for 10 cases
This is not a fixed STL. SpeakCAD generates the nintendo switch game case shelf holder for 10 cases to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a Switch game case holder for 10 cases, 136×90×45 mm, 11.8 mm slots with 1.6 mm ribs, 20 mm thumb notch, 2 mm walls.
What a nintendo switch game case shelf holder for 10 cases is
A shelf holder for ten Nintendo Switch or Switch 2 retail cases (170 × 105 × 11 mm) standing spine-out like books. Each slot is 11.8 mm wide with 1.6 mm ribs, the holder is 136 × 90 mm and 45 mm tall so the covers stay visible, and a 20 mm thumb notch lets you pull a case out. Print in PLA flat, 2 mm walls.
PS5 and Xbox cases are 14 mm thick and will not fit these slots. Open the ready-made holder in SpeakCAD for free, change the case count in the viewer or the chat, then download the STL.
People also search
switch game case holder stlnintendo switch case organizer 3d printswitch game box rackswitch 2 game case shelf
Questions people ask about a nintendo switch game case shelf holder for 10 cases
A shelf holder for ten Nintendo Switch or Switch 2 retail cases (170 × 105 × 11 mm) standing spine-out like books. Each slot is 11.8 mm wide with 1.6 mm ribs, the holder is 136 × 90 mm and 45 mm tall so the covers stay visible, and a 20 mm thumb notch lets you pull a case out. Print in PLA flat, 2 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a Switch game case holder for 10 cases, 136×90×45 mm, 11.8 mm slots with 1.6 mm ribs, 20 mm thumb notch, 2 mm walls.
PS5 and Xbox cases are 14 mm thick and will not fit these slots. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Prusa MK4S ObXidian nozzle-swap caddyA bench caddy that holds six MK4S / Nextruder nozzles (Cht, ObXidian, brass) in 10 mm hex pockets 12 mm deep plus a 8 mm well for the nozzle wrench.Dyson Supersonic r travel-pouch insertAn insert that keeps a Supersonic r and two nozzles from grinding in the official travel pouch.Bambu Lab A1 mini side spool roller standA low roller stand that sits next to an A1 mini so the spool feeds from the side rather than from the top of the Z column, handy for heavy 1 kg spools and ca…IKEA SKADIS hook for 3M Peltor ear defendersA wide SKADIS hook for 3M Peltor earmuffs (Optime and X series), whose headbands are about 35 to 40 mm wide.Forstner bit organizer, 15 to 35 mmA tray for a five-piece Forstner set (15, 20, 25, 30 and 35 mm) that holds each bit cutter-down in a round pocket 1 mm larger than the head, with a 10.5 mm s…Anker Nano charger and cable desk organizer trayA tray that keeps two Anker Nano GaN chargers and their USB-C cables together on a desk or in a travel drawer.