1
Organizers & storage
Sony NP-FW50 battery and SD caddy
This is not a fixed STL. SpeakCAD generates the sony np-fw50 battery and sd caddy to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a caddy for three Sony NP-FW50 batteries, 32.6×19.2×38 mm pockets, three 25×2.8 mm SD slots, snap lid, 1.4 mm walls.
What a sony np-fw50 battery and sd caddy is
A pocket caddy for three Sony NP-FW50 batteries (31.8 × 18.4 × 45.8 mm) and three SD cards, sized for A6400, A6100 and ZV-E10 shooters. Battery pockets are 32.6 × 19.2 × 38 mm deep so the tops stick out for grabbing, SD slots are 25 × 2.8 mm and a snap lid closes the whole block. Walls are 1.4 mm. Print upright in PETG.
The NP-FZ100 used by the A6700 and A7 IV is much larger (about 37.8 × 22 × 50 mm) and will not go in. Open the ready-made model in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
np-fw50 battery holder stlsony fw50 battery case 3d printzv-e10 battery and sd card casea6400 battery holder
Questions people ask about a sony np-fw50 battery and sd caddy
A pocket caddy for three Sony NP-FW50 batteries (31.8 × 18.4 × 45.8 mm) and three SD cards, sized for A6400, A6100 and ZV-E10 shooters. Battery pockets are 32.6 × 19.2 × 38 mm deep so the tops stick out for grabbing, SD slots are 25 × 2.8 mm and a snap lid closes the whole block. Walls are 1.4 mm. Print upright in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a caddy for three Sony NP-FW50 batteries, 32.6×19.2×38 mm pockets, three 25×2.8 mm SD slots, snap lid, 1.4 mm walls.
The NP-FZ100 used by the A6700 and A7 IV is much larger (about 37.8 × 22 × 50 mm) and will not go in. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Insta360 X4 travel case insertAn insert that turns a small box into a travel case for an Insta360 X4 (46 × 123.6 × 37.6 mm) and its kit.Gridfinity bin for 24 1/4 inch hex bitsA 2 × 1 Gridfinity bin (83.5 × 41.5 mm, 3 units tall) holding 24 standard 1/4 inch hex bits (6.35 mm across flats, 25 mm long).Apple Pencil Pro desk tray with USB-C adapter pocketA desk tray that stores an Apple Pencil Pro or 2nd generation (166 mm long, 8.9 mm across) in a half-round groove, with a second groove for the shorter Apple…Dr. Brown's bottle vent and insert organizer trayA tray that gives the many small parts of Dr.Sonicare DiamondClean travel-case insertAn insert that holds a DiamondClean handle and two heads in a 180 × 50 mm hard case with 0.4 mm clearance.DeWalt TSTAK deep-box divider setDividers that split a TSTAK deep box into four 150 × 140 mm wells for fittings.