1
Brackets & mounts
Sonoff ZBDongle-P USB extension holder
This is not a fixed STL. SpeakCAD generates the sonoff zbdongle-p usb extension holder to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a ZBDongle-P wall holder, 66×28×12 mm cradle, antenna exit on top, USB extension plug snap, two 4 mm holes, 1.6 mm PETG.
What a sonoff zbdongle-p usb extension holder is
A wall holder for a Sonoff ZBDongle-P (about 65 × 27 × 11 mm without the antenna) on a USB extension cable, so the coordinator sits 1 m away from the USB 3 ports and hard drives that jam 2.4 GHz. The cradle is 66 × 28 × 12 mm, the antenna exits the top, the USB-A plug is held by a 0.3 mm snap, and two 4 mm holes screw it to a wall. Print in PETG, 1.6 mm walls.
The ZBDongle-E is a different shell. Open the model in SpeakCAD at no cost, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
zbdongle-p holder stlsonoff zigbee dongle mount 3d printzbdongle p usb extension mountzigbee coordinator wall mount 3d model
Questions people ask about a sonoff zbdongle-p usb extension holder
A wall holder for a Sonoff ZBDongle-P (about 65 × 27 × 11 mm without the antenna) on a USB extension cable, so the coordinator sits 1 m away from the USB 3 ports and hard drives that jam 2.4 GHz. The cradle is 66 × 28 × 12 mm, the antenna exits the top, the USB-A plug is held by a 0.3 mm snap, and two 4 mm holes screw it to a wall. Print in PETG, 1.6 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a ZBDongle-P wall holder, 66×28×12 mm cradle, antenna exit on top, USB extension plug snap, two 4 mm holes, 1.6 mm PETG.
The ZBDongle-E is a different shell. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
GL.iNet Beryl AX travel router mountA strap-on mount for a GL.iNet Beryl AX (GL-MT3000, about 120 × 83 × 34 mm) that holds it on a desk leg, van wall or hotel TV cable.iPhone 16 Pro MagSafe wall mount for charger puckA slim wall plate that holds an Apple MagSafe charger puck (56 mm diameter, about 5.5 mm thick) so an iPhone 16 Pro (149.6 x 71.5 x 8.25 mm) snaps onto the w…Google Nest Mini wall hanger with hidden cableA hanger for the Google Nest Mini that uses the screw slot moulded into the back of the speaker.Chuckit ball launcher wall mount with ball holderA garage or hallway mount that holds a Chuckit Classic 26M launcher upright by its handle and keeps two tennis balls ready beside it.Hatch Restore 2 wall shelf with cable slotA 160 mm shelf that holds a Restore 2 and drops the USB-C through a 8 mm slot so the nightstand stays clear.Milwaukee M12 FUEL installation-driver holsterA holster that hangs an M12 FUEL installation driver (about 280 mm long) by the barrel so the offset head stays clear.