1
Brackets & mounts
iPad Pro 13 inch under-cabinet kitchen mount
A pair of L-shaped hooks that screw to the underside of a kitchen cabinet and hold an iPad Pro 13 (281.6 x 215.5 x 5.1 mm) below eye level for recipes and video. Each hook has an 8 mm deep channel that is 6.5 mm wide, giving 1.4 mm clearance for the bare tablet or a thin Smart Folio, and the pair is spaced 285 mm apart so the tablet slides in from the side. The channel tilts 20 degrees toward you, walls are 3 mm, and each hook prints on its side without supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| hook width | 40 mm |
| wall thickness | 3 mm |
| flange length (front-back) | 60 mm |
| flange width (== width) | 40 mm |
| flange thickness | 6 mm |
| vertical arm height (from flange bottom to base of channel) | 60 mm |
| channel width | 6.5 mm |
| channel depth | 8 mm |
| front lip height | 6 mm |
| screw hole diameter | 4.5 mm |
| countersink diameter | 8.5 |
| countersink depth | 3 |
| inset from flange edges for holes | 10 mm |
Example prompt
Design two mirrored L-shaped under-cabinet hooks for an iPad Pro 13, each 40 mm wide with a 6.5 mm wide, 8 mm deep channel tilted 20 degrees, a 60 x 40 mm top flange with two 4.5 mm countersunk screw holes, 3 mm walls and a 6 mm front lip.
Fit notes
A loose channel lets the tablet fall out when the dishwasher door bangs, while a tight one scratches the edges. In SpeakCAD you describe the tablet, its case and the cabinet depth, preview the hooks in the browser, change the tilt or channel width in the chat, then download the STL.
Questions people ask about an iPad Pro 13 inch under-cabinet kitchen mount
A pair of L-shaped hooks that screw to the underside of a kitchen cabinet and hold an iPad Pro 13 (281.6 x 215.5 x 5.1 mm) below eye level for recipes and video. Each hook has an 8 mm deep channel that is 6.5 mm wide, giving 1.4 mm clearance for the bare tablet or a thin Smart Folio, and the pair is spaced 285 mm apart so the tablet slides in from the side. The channel tilts 20 degrees toward you, walls are 3 mm, and each hook prints on its side without supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More brackets & mounts
Saddle clamp for 20 mm electrical conduitReady-made, opens free. A single-screw saddle that fixes 20 mm PVC electrical conduit to a wall or joist, handy when a run needs one more clip and the shop is closed.Wahoo ELEMNT Bolt out-front mount for 35 mm barsReady-made, opens free. Oversized 35 mm handlebars are common on modern gravel and mountain bikes, yet most Wahoo mounts ship for 31.8 mm only.Ring Video Doorbell 30 degree wedge mountReady-made, opens free. An angled spacer that turns a Ring Video Doorbell 2nd gen towards the path when the door sits in a recess.IKEA Billy bookcase anti-tip wall bracketReady-made, opens free. A low-profile bracket that ties the top of an IKEA Billy bookcase to the wall and replaces the flimsy strap or a lost original fitting.DJI Osmo Pocket 3 desk cradle with tripod threadReady-made, opens free. A weighted desk cradle for a DJI Osmo Pocket 3 (about 140 × 42 × 34 mm) with a 1/4-20 brass-insert boss underneath and a 16 mm well that the handle drops into.Studio Display iPhone Continuity Camera mountReady-made, opens free. A MagSafe clip that hangs an iPhone 16 or 17 on the top bezel of a Studio Display for Continuity Camera, 8–14 mm bezel clamp and a 56 mm MagSafe disc.