1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Samsung Galaxy Watch Ultra charger dock
This is not a fixed STL. SpeakCAD generates the samsung galaxy watch ultra charger dock to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a samsung galaxy watch ultra charger dock is
A dock that holds a Galaxy Watch Ultra (about 47 mm) on its official puck at 15 degrees so the display is readable from the pillow. The nest is 49 mm with a 28 mm puck bore and a 6 mm cable slot. Print in PLA with 2 mm walls.
The Galaxy Watch puck holder is a generic well. In SpeakCAD you confirm Ultra vs Watch 7, preview the dock in the browser without paying, then download the STL.
Example prompt
Model a Galaxy Watch Ultra dock 80×60×28 mm, 49 mm nest at 15 degrees, 28 mm puck bore, 6 mm cable slot, 2 mm walls.
People also search
galaxy watch ultra dock stlsamsung watch ultra charger 3d printwatch ultra nightstand standgalaxy ultra charger dock 3d model
Questions people ask about a samsung galaxy watch ultra charger dock
A dock that holds a Galaxy Watch Ultra (about 47 mm) on its official puck at 15 degrees so the display is readable from the pillow. The nest is 49 mm with a 28 mm puck bore and a 6 mm cable slot. Print in PLA with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Galaxy Watch Ultra dock 80×60×28 mm, 49 mm nest at 15 degrees, 28 mm puck bore, 6 mm cable slot, 2 mm walls.
The Galaxy Watch puck holder is a generic well. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Anker MagGo Qi2 charger puck desk standAn angled desk stand for the round Anker MagGo Qi2 wireless charging pad, so a Qi2 phone such as an iPhone 16 or Galaxy S25 stands at 60 degrees for video ca…Garmin Forerunner 970 bedside charger standA small bedside stand for a Garmin Forerunner 970 (about 47 mm) that holds the watch on its clip charger at 25 degrees so the display is readable from the pi…Arturia MiniLab 3 angled feetReplacement rear feet that put a MiniLab 3 at 8 degrees, 20 × 12 × 10 mm with the stock 4 mm pin.Magic Trackpad 2 angled desk wedgeA 8 degree wedge under a Magic Trackpad 2 / USB-C Trackpad (about 160 × 115 mm) so the front edge matches a Magic Keyboard.Dyson Corrale HS07 charger dockA dock that holds a Dyson Corrale HS07 (about 45 × 32 mm closed) on its magnetic charger so the plates do not rest on the glass.Bose Smart Ultra soundbar cable combA comb that sits behind a Smart Ultra soundbar and separates HDMI eARC, power and optical so they do not knot.